
MOOGPART NUMBER: 719-K500306
Front Right Lower Ball Joint for 2010-2011 Honda CR-V
$7562
2 left in stockItems You Need
Front Right Lower Ball Joint2010-2011 Honda CR-V Greaseable Socket Mounting Hardware Included Gusher Bearing Design Pressed-In Cover Plate Belleville Preload Washer Heat-Treated Ball Stud Sold Individually
The MOOG K500306 front right lower ball joint is built as a direct replacement for 2010-2011 Honda CR-V. Gusher bearing design lets grease pass through the bearing surface to cut friction at the stud. Pressed-in cover plate seals out debris and holds the internal bearing package tight.
MOOG K500306 Ball Joint Features:
- Fits 2010-2011 Honda CR-V
- Mounting position: front right lower
- Greaseable design accepts fresh grease at service intervals
- Mounting hardware included
- Gusher bearing design lets grease pass through the bearing surface to cut friction at the stud
- Pressed-in cover plate seals out debris and holds the internal bearing package tight
- Belleville preload washer keeps the bearing package tight as the internal bearings wear
- Ball stud is heat treated to OE-equivalent requirements
- Sold individually
Part TypeSuspension Ball Joint
BrandMOOG
Package Width2.0
Weight2.0 PG
Part CategoryReplacement Parts
PositionFront Right Lower
GreaseableYes
Mounting Hole Quantity3
QuantitySold Individually
Mounting Hardware IncludedYes
Cotter Pin HoleYes
Part FitmentDirect Fit
AdjustableNo
Vendor Part NumberK500306
Package Qty1
Package TypeEA
Some parts are not legal for use in California or other states with similar laws / regulations

![Industrial Nitrile Gloves [6 mils Thick, Medium]](https://www.jegs.com/images/mini_200/500/555/555-1133.jpg)

![Round Magnetic Parts Tray [5 1/2 in. Round]](https://www.jegs.com/images/mini_200/500/555/555-80080.jpg)


![Pistol Grip Grease Gun [14 oz]](https://www.jegs.com/images/mini_200/500/555/555-81018.jpg)

![3-Ton Low-Profile Professional Floor Jack [6,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80038.jpg)

![1/2 in. Drive Torque Wrench [10 to 150 ft. lbs.]](https://www.jegs.com/images/mini_200/500/555/555-m200db.jpg)
![Breaker Bar [1/2 in. Drive, 30 in. L]](https://www.jegs.com/images/mini_200/500/555/555-w32126.jpg)
![3/8 in. Drive Metric Socket Set [10-Piece, 6-Point]](https://www.jegs.com/images/mini_200/500/555/555-w38202.jpg)
