
RS9000XL Adjustable Front/Rear Shock Absorber1943-1975 Jeep CJ5, CJ6, Willys 0-1.5 in. Lift 17.35 in. Extended, 11.99 in. Compressed 9-Position Adjustable Damping Gas Charged Steel Silver Sold Individually
The RS9000XL front or rear shock absorber is built for 1943-1975 Jeep CJ5, CJ6, Willys models at stock height or with up to 1.5 in. of lift. It runs 5.35 in. of travel between 11.99 in. compressed and 17.35 in. extended, with a silver tri-tube steel body and a 9-position knob for compression and rebound damping.
Rancho RS994119 Shock Absorber Features:
- Fits 1943-1958 Jeep Willys, 1959-1966 CJ3, 1969-1973 Commando, 1959-1965 DJ3, 1965-1974 DJ5, 1969-1971 Jeepster, 1959-1975 CJ5, 1959-1975 CJ6, 1974 Wagoneer, 1966-1968 CJ5A, 1966-1968 CJ6A
- Also fits 1961-1967 Dodge D300 Series, 1961-1967 W300 Series, 1968-1971 D300 Pickup, 1968-1969 W300 Pickup; 1985-1995 Suzuki Samurai; 1973-1974 AM General FJ8; 1964-1983 Toyota Land Cruiser
- Extended length 17.35 in., compressed length 11.99 in. and 5.35 in. of travel
- Upper mount: loop bushing, 5/8 in. bushing ID x 1-5/16 in. bushing length; lower mount: loop bushing, 5/8 in. bushing ID x 1-5/16 in. bushing length
- Designed for stock front ride height and 0-1.5 in. of rear lift
- Some applications limited by build: to serial # 1286462
- Replaces previous part number RS999119
- 9-position knob adjusts compression and rebound damping by hand
- Tri-tube steel body, 2.37 in. (60.3mm) diameter, with all-weather fluid rated for internal temperatures of -40 to 248 degrees F
- Nitrogen gas charge of 45 or 60 PSI, by application, limits oil foaming and damping fade
- Polyurethane rebound bumper and bushings with a graphite-filled fluon-banded piston
- Low-friction, self-lubricating seal retains gas and oil
Rancho RS994119 Installation Notes:
- On some applications the shock bushing ID is smaller than the mounting pin and requires lubrication and extra effort to install
Part TypeShock Absorber
BrandRANCHO
Package Height4.0
Package Width4.5
Package Length24.0
Weight9.55 PG
Cylinder Outside Diameter60.3 mm
Body ColorSilver
Bladder(S) IncludedNo
Includes Bump StopNo
Maximum Ride Height Lowering Distance0 in
Hydraulic LockoutNo
Adjustable Ride HeightNo
Spring IncludedNo
New Or RemanufacturedNew
Active Or Passive SuspensionPassive
Body Diameter2.374 in
Extended Length440.6 mm
Self-LevelingNo
Shock Absorber Body End Measuring PointCenter of Loop
Dust Shield MaterialRubber
Boot IncludedYes
Lower Mount TypeLoop Bushing Mount - 5/8 in. Bushing ID X 1.5/16 in. Bushing OAL
Bearing Plate IncludedNo
ColorSilver
Air Ride SuspensionNo
Strut Mount Insulator(S) IncludedNo
Internal Construction TypeTri Tube
Upper Mount TypeLoop Bushing Mount - 5/8 in. Bushing ID X 1.5/16 in. Bushing OAL
Lower Mount CodeL1
Damping Adjustment TypeManual
Dust Shield ColorRed
Adjustable ReboundYes
Adjustable DampingYes
Adjustable CompressionYes
Valving TypeProgressive
Part CategoryPerformance Parts
Internal Rebound SpringNo
Dust Shield Diameter2.99 in
Gas ChargedYes
Rod Diameter18 mm
Bladder Heavy Duty Crimping Rings IncludedNo
Cylinder ColorSilver
Cylinder FinishPainted
Spring Isolators IncludedNo
Shock Absorber Rod End Measuring PointCenter of Loop
Shock Absorber Bore Size1.26 in
Shock Stroke136 mm
Shaft MaterialChromed
Spring Seat IncludedNo
Dust Shield IncludedYes
Air AdjustableNo
Internal Rebound BumperNo
FinishPainted
Bladder Sleeve(S) IncludedNo
Remote ReservoirNo
Compressed Length304.6 mm
Parts Pack(S)SMP-794
QuantitySold Individually
Mounting Hardware IncludedYes
Coil Over Springs IncludedNo
TypeTelescopic
Body MaterialSteel
Coil Spring Insulator(S) IncludedNo
Travel Length136 mm
Upper Mount CodeL1
Cylinder MaterialSteel
Part FitmentDirect Fit
Maximum Ride Height Raising Distance0 in
Grade TypePerformance
Vendor Part NumberRS994119
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations