
RS9000XL Adjustable Rear Shock Absorber1998-2011 Ford F-450, F-550 Super Duty, Ranger Stock Ride Height 26.04 in. Extended, 16.36 in. Compressed 9-Position Adjustable Damping Gas Charged Steel Silver Sold Individually
The RS9000XL rear shock absorber for 1998-2011 Ford F-450, F-550 Super Duty, Ranger models at stock ride height spans 16.36 in. compressed to 26.04 in. extended. Damping adjusts through 9 positions, and a silver 2K paint finish covers the steel tri-tube body.
Rancho RS994126 Shock Absorber Features:
- Fits 1999-2004 Ford F-450 Super Duty, 1999-2004 F-550 Super Duty, 1998-2011 Ranger
- Extended length 26.04 in., compressed length 16.36 in. and 9.68 in. of travel
- Upper mount: loop bushing, 5/8 in. bushing ID x 1-5/16 in. bushing length; lower mount: loop bushing and sleeve, 12mm sleeve ID x 1-1/2 in. sleeve length
- Designed for stock rear ride height
- Replaces previous part number RS999126
- 9-position knob adjusts compression and rebound damping by hand
- Tri-tube steel body, 2.19 in. (55.6mm) diameter, with all-weather fluid rated for internal temperatures of -40 to 248 degrees F
- Low-friction, self-lubricating seal retains gas and oil
- Red rubber protective boot included
- Dual-component 2K paint finish resists chipping
- Chrome 15.8mm piston rod
- Suited to stock or lifted trucks, SUVs and Jeeps that tow, haul or go off-road
Part TypeShock Absorber
BrandRANCHO
Package Height4.0
Package Width4.5
Package Length24.0
Weight9.55 PG
Cylinder Outside Diameter55.6 mm
Body ColorSilver
Bladder(S) IncludedNo
Includes Bump StopNo
Maximum Ride Height Lowering Distance0 in
Hydraulic LockoutNo
Adjustable Ride HeightNo
Spring IncludedNo
New Or RemanufacturedNew
Active Or Passive SuspensionPassive
Body Diameter2.188 in
Extended Length661.4 mm
Self-LevelingNo
Shock Absorber Body End Measuring PointCenter of Loop
Dust Shield MaterialRubber
Boot IncludedYes
Lower Mount TypeLoop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.1/2 in. Sleeve OAL
Bearing Plate IncludedNo
ColorSilver
Air Ride SuspensionNo
Strut Mount Insulator(S) IncludedNo
Internal Construction TypeTri Tube
Upper Mount TypeLoop Bushing Mount - 5/8 in. Bushing ID X 1.5/16 in. Bushing OAL
Lower Mount CodeLS26
Damping Adjustment TypeManual
Dust Shield ColorRed
Adjustable ReboundYes
Adjustable DampingYes
Adjustable CompressionYes
Valving TypeProgressive
Part CategoryPerformance Parts
Internal Rebound SpringNo
Dust Shield Diameter2.99 in
Gas ChargedYes
Rod Diameter15.8 mm
Bladder Heavy Duty Crimping Rings IncludedNo
Cylinder ColorSilver
Cylinder FinishPainted
Spring Isolators IncludedNo
Shock Absorber Rod End Measuring PointCenter of Loop
Shock Absorber Bore Size1.2598425196850394 in
Shock Stroke9.68 in
Shaft MaterialChromed
Spring Seat IncludedNo
Dust Shield IncludedYes
Air AdjustableNo
Internal Rebound BumperYes
FinishPainted
Bladder Sleeve(S) IncludedNo
Remote ReservoirNo
Compressed Length16.36 in
QuantitySold Individually
Mounting Hardware IncludedNo
Coil Over Springs IncludedNo
TypeTelescopic
Body MaterialSteel
Coil Spring Insulator(S) IncludedNo
Travel Length245.9 mm
Upper Mount CodeL1
Cylinder MaterialSteel
Part FitmentDirect Fit
Maximum Ride Height Raising Distance0 in
Grade TypePerformance
Vendor Part NumberRS994126
Package Qty1
Package TypeEA
Some parts are not legal for use in California or other states with similar laws / regulations