Track OrderOrder Status & ReturnsHelpGift CardsHelpHelp CenterPhone1-800-345-4545
Logo
Cart0
$000
RS9000XL SHOCK
InfoVehicle Info Needed
RANCHOPART NUMBER: 801-RS994240

RS9000XL SHOCK

$13899
ShippingShips on 11/16/2026
Lowest PriceLowest Price Guarantee

RS9000XL Rear Shock Absorber
  • 1997-2006 Jeep Wrangler, TJ
  • 9-Position Adjustable Damping
  • 19.22 in. Extended, 12.86 in. Compressed
  • 45 or 60 PSI Nitrogen Gas Charged
  • Steel
  • Silver
  • Sold Individually

    This RS9000XL rear shock absorber fits 1997-2006 Jeep Wrangler, TJ. Its 2.18 in. tri-tube steel body and 0.62 in. rod travel from 12.86 in. compressed to 19.22 in. extended, with a cross pin mount at the top.

    Rancho RS994240 Shock Absorber Features:

    • Fits 1997-2006 Jeep Wrangler, 1997-2006 Jeep TJ
    • Extended length 19.22 in., compressed length 12.86 in., travel 6.36 in.
    • Nine-position manual adjustment knob for on-road and off-road damping control
    • Nitrogen gas charged to 45 or 60 PSI to reduce damping fade and foaming
    • 2.18 in. steel tri-tube body with progressive valving and all-weather fluid
    • 0.62 in. chrome-plated piston rod
    • Upper cross pin mount, open ended, 3/8 in. hole ID (both ends) x 3-3/16 in. pin length (hole center to center); lower loop bushing and sleeve mount, 12 mm sleeve ID x 1-3/8 in. sleeve OAL
    • Includes red dust boot
    • Dual component 2K silver paint finish resists chipping
    • Polyurethane rebound bumper and bushings with graphite-filled, fluon-banded piston
    • Part TypeShock Absorber
    BrandRANCHO
    Cylinder Outside Diameter2.18 in
    Body ColorSilver
    Bladder(S) IncludedNo
    Includes Bump StopNo
    Maximum Ride Height Lowering Distance0 in
    Hydraulic LockoutNo
    Adjustable Ride HeightNo
    Spring IncludedNo
    New Or RemanufacturedNew
    Active Or Passive SuspensionPassive
    Body Diameter55.4 mm
    Extended Length488.2 mm
    Self-LevelingNo
    Shock Absorber Body End Measuring PointCenter of Cross Pin
    Dust Shield MaterialRubber
    Boot IncludedYes
    Lower Mount TypeLoop Bushing and Sleeve Mount - 12MM Sleeve ID X 1.3/8 in. Sleeve OAL
    Bearing Plate IncludedNo
    ColorSilver
    Air Ride SuspensionNo
    Strut Mount Insulator(S) IncludedNo
    Internal Construction TypeTri Tube
    Upper Mount TypeCross Pin Mount - Open Ended, 3/8 in. Hole ID (Both Ends) X 3.3/16 in. Pin Length (Hole Center to Center)
    Lower Mount CodeLS24
    Damping Adjustment TypeManual
    Dust Shield ColorRed
    Adjustable ReboundYes
    Adjustable DampingYes
    Adjustable CompressionYes
    Valving TypeProgressive
    Part CategoryPerformance Parts
    Internal Rebound SpringNo
    Dust Shield Diameter2.99 in
    Gas ChargedYes
    Rod Diameter15.8 mm
    Bladder Heavy Duty Crimping Rings IncludedNo
    Cylinder ColorSilver
    Cylinder FinishPainted
    Spring Isolators IncludedNo
    Shock Absorber Rod End Measuring PointCenter of Loop
    Shock Absorber Bore Size32 mm
    Shock Stroke161.5 mm
    Shaft MaterialNitrocarburized
    Spring Seat IncludedNo
    Dust Shield IncludedYes
    Air AdjustableNo
    Internal Rebound BumperNo
    FinishPainted
    Bladder Sleeve(S) IncludedNo
    Remote ReservoirNo
    Compressed Length326.6 mm
    QuantitySold Individually
    Mounting Hardware IncludedNo
    Coil Over Springs IncludedNo
    TypeTelescopic
    Body MaterialSteel
    Coil Spring Insulator(S) IncludedNo
    Travel Length6.36 in
    Upper Mount CodeXP12
    Cylinder MaterialSteel
    Part FitmentDirect Fit
    Maximum Ride Height Raising Distance0 in
    Grade TypePerformance
    Package Qty1
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning