
RIDETECHPART NUMBER: 029-12127099
12127099 Independent Rear Suspension for 1979-1993 Ford Fox Body Mustang
$4,50000
Truck Freight
Ford
Independent Rear Suspension System1979-1993 Ford Mustang Bolt-In Design Lowers Stance About 2 in. Reduced Center of Gravity Reduced Upsprung Weight 5 in. Roll Center 1-Degree of Camber Gain 0-Bump Steer 50-Percent Anti-Squat
Independent rear suspensions (IRS) are superior in almost every way over a straight rear axle. This bolt-on Ridetech 12127099 IRS Conversion is an easy bolt-on system for the 1979-1993 Fox Body Mustang. It provides maximum performance, high strength, and OEM reliability utilizing SN95/S550 Mustang driveline & brake components for an unstoppable combination.
Ridetech 12127099 Independent Rear Suspension Features:
- 100% Bolt-in design requires minimal modifications
- Lowered stance of approximately 2 in. reduces the center of gravity without adversely affecting suspension geometry
- Reduced unsprung weight improves ride quality
- Low 5 in. roll center and 1 degree of camber gain with zero bump steer provide improved cornering and suspension geometry over the original suspension design
- 50% anti-squat provides excellent traction
- Delrin control arm bushings eliminate wheel hop with no noise and no bushing lube required unlike urethane
- Retains factory track width
- Compatible with mini-tubs (cradle attaches to the inside of the frame rails)
- Modular design
- Spindles include Moog S550 Mustang rear hubs for maximum strength, consistent braking & reduced maintenance
- Durable powder coat finish corrosion resistance
Ridetech 12127099 Independent Rear Suspension Notes:
- Uses S550 Mustang differential such as M-400188355B or equivalent (sold separately), used takeout units are also available
- Requires Ridetech 4 in. shorter than stock axles 12129599 (sold separately) withstanding up to 500 flywheel horsepower
- Ridetech 12129510 Caliper Brackets (sold separately) allows direct bolt-on of both stock or aftermarket brakes from a 1999-2004 SN95 Mustang Cobra
- Ridetech 12129511 Caliper Brackets (sold separately) allows direct bolt-on of both stock or aftermarket brakes from an S550 Mustang
- Compatible with 1999-2004 Mustang Cobra cat-back exhaust systems
- Requires driveshaft to be shortened
- Requires pinion flange to U-joint adapter such as Sonnax T35-ALFY-09 or equivalent (sold separately)
- Works with Ridetech 12126410 or 12126411 Coilovers or 21130101 Shockwaves (each sold separately)
- Optional Ridetech 12129102 adjustable rate rear sway bar is available for additional fine-tuning (sold separately)
Part TypeSuspension Kit
BrandRIDETECH
Package Width224.0
Weight224.0 PG
Part CategoryPerformance Parts
PositionRear
Part FitmentDirect Fit
Vendor Part Number12127099
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
Some parts are not legal for use in California or other states with similar laws / regulations







![6-Bolt Adapter Flange Yoke Kit For 1350-Series U-Joints [Aluminum]](https://www.jegs.com/images/mini_200/800/852/852-t35-alfy-09.jpg)
![M-4001-88355B Mustang Super 8.8 in. IRS Loaded Differential Housing [3.55 Ratio]](https://www.jegs.com/images/mini_200/300/397/397-m-400188355b.jpg)
![Caster/Camber Gauge [Camber Angles: +/- 8 Deg.]](https://www.jegs.com/images/mini_200/500/555/555-81679.jpg)


![2-Ton Low-Profile Aluminum Floor Jack [4,000 lbs. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80006.jpg)

![Wheel Chock [Solid Rubber]](https://www.jegs.com/images/mini_200/500/555/555-w41001.jpg)
![3-Piece Wire Brush Set [Stainless Steel, Brass Bristles with Plastic Handle]](https://www.jegs.com/images/mini_200/500/555/555-w1149.jpg)
![Socket Set, 3/8 in. & 1/4 in. Drive [SAE/Metric 52-Piece]](https://www.jegs.com/images/mini_200/500/555/555-81565.jpg)





![Deep Well Impact Socket Set, 1/2 in. Drive [SAE 11-Piece]](https://www.jegs.com/images/mini_200/500/555/555-m590db.jpg)
![Mechanic Chair & Step Stool on Wheels [300 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-81156.jpg)