Rough Country 23338_A N3 rear shocks are built for lifted Suzuki Jimny 4WD models that need controlled damping, reduced fade, and a steadier ride after adding ride height. Tuned for vehicles with a 1-3 in. suspension lift, these rear shock absorbers combine 10-stage variable valving, nitrogen pressure, and a large shock body to help keep the suspension composed on pavement, trails, and rough worksite roads.

Rough Country 23338_A Features:

• Fits the rear position on 2018-2026 Suzuki Jimny 4WD models equipped with a 1-3 in. suspension lift.
• 10-stage variable valving supports controlled compression and rebound response across changing road and trail conditions.
• High-pressure nitrogen charge helps limit shock fade during repeated cycling over rough terrain.
• 54 mm shock body improves oil capacity and heat dissipation for more consistent damping performance.
• 18 mm chromed hardened piston rod and 35 mm piston add strength and stability under suspension load.
• 36 kN tensile strength rating supports durability for heavy impacts and demanding off-road use.
• Collapsed length is 12.30 in. and extended length is 19.69 in. for lifted rear suspension geometry.
• Upper and lower eye mounts match the required rear shock mounting style for the listed Jimny application.
• Natural rubber bushings help absorb vibration and reduce road noise at the mounting points.
• Spring-loaded piston rod seal helps guard against fluid leaks during regular suspension movement.
• Metallic silver painted finish helps resist corrosion while keeping the rear suspension hardware clean-looking.

Includes:

• Two rear N3 shock absorbers

Use these shocks when servicing or upgrading the rear suspension on a lifted Jimny that sees mixed street driving, trail use, or rough-road travel. Verify lift height and mount style before installation.

Only for Suzuki Jimny 4WD models with a 1-3 in. suspension lift; not intended for stock ride height applications.