Rough Country 501198 N3 leveling struts raise the front of a coil-spring 4WD Toyota 4Runner by 2 in. to reduce factory rake, add ground clearance, and create room for a more aggressive tire and stance setup while keeping ride quality close to OEM. The loaded-strut design arrives assembled, so installers can skip spring compressor work and avoid disassembling the original strut during the front suspension upgrade.

Rough Country 501198 Features:

• 2 in. front leveling height helps bring the 4Runner closer to a front-to-rear level stance and improves clearance at the nose of the vehicle.
• N3 strut construction uses a 1 3/8 in. bore, nitrogen gas charge, precision valving, and variable damping technology to control shock oil aeration and respond to changing road surfaces.
• Internal durability features include low-friction shock oil, a hardened chromed piston rod, and a leak-proof piston seal for consistent suspension movement.
• Silver powder-coated finish adds corrosion resistance for under-vehicle exposure on daily driven and off-road 4Runner builds.
• Direct-fit, bolt-on loaded-strut format is designed for installation without strut disassembly or a spring compressor, with typical installation time listed at 2 to 3 hours.
• A professional alignment is recommended after installation to set suspension geometry after the front ride height change.

Includes:

• Preassembled N3 loaded strut assemblies with coil springs

Use these loaded struts when the goal is a cleaner level stance, added front ground clearance, and a simpler front suspension install on the newest 4Runner platform without stacking spacers.

Designed for 4WD Toyota 4Runner models from 2025 and 2026 with factory coil spring suspension. Does not fit 2WD models, AVS-equipped models, or Trailhunter models, and these struts are not compatible with additional strut spacers.