
SPEEDMASTERPART NUMBER: 746-1-147-076
MidRise Air Intake Manifold Oldsmobile 400/425/455 ci - Satin Finish
$35500
1 left in stockOldsmobile
MidRise Air Intake ManifoldOldsmobile 400/425/455ci Single Plane with Divider Height: 6.500 in. Non-EGR RPM Range: 1,500-6,500 Satin Finish
1-147-076 Features:
- Matching plenum and runner design to keep air and fuel distribution even
- An open area underneath the plenum chamber (Air Gap) delivers cooler charge air and less heat transfer
- High-grade aluminum casting
- Post-machined intake ports
- Square bore carburetor mounting flange
Note:
- Hood clearance must be checked before installation - The manifold is approximately 1.250 in. taller than stock
Powerful Performance Intakes
Speedmaster MidRise Intake Manifolds deliver maximum power for your non-pollution-controlled V8 street rod. The dual-plane design of these cast-aluminum intakes will fit a medium horsepower (HP) engine block and produce performance results comparable to the Shootout Racing intake manifold.
Part TypeIntake Manifold
Product LineSpeedmaster MidRise Intake Manifolds
BrandSPEEDMASTER
Package Height7.6
Package Width16.7
Package Length23.2
Weight25.85 PG
Part CategoryPerformance Parts
EgrNo
Intake MaterialCast Aluminum
Intake StyleSingle Plane w/Divider
Rpm Range1500-6500
QuantitySold individually
Intake FinishSatin
Part FitmentSemi Universal
Engine Make/SizeOldsmobile V8
Manifold TypeMid Rise
Vendor Part Number1-147-076
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
Some parts are not legal for use in California or other states with similar laws / regulations

![Blue RTV, Temperature Resistant up to 500 degrees [3 oz. Tube]](https://www.jegs.com/images/mini_200/500/555/555-28030.jpg)
![Black RTV, Temperature Resistant up to 625 Degrees F [3.8 oz. Tube]](https://www.jegs.com/images/mini_200/500/555/555-28035.jpg)








![NPT Straight Hose Barb Fitting [1/8 in. NPT to 3/8 in. Hose, Brass]](https://www.jegs.com/images/mini_200/500/555/555-16004.jpg)
![4-Barrel Carburetor Base Gasket [Square Flange]](https://www.jegs.com/images/mini_200/500/555/555-16100.jpg)

![Carburetor Stud Kit [1 1/2 in. Long]](https://www.jegs.com/images/mini_200/500/555/555-15840.jpg)

![Phenolic Carburetor Spacer with 4150/4160 Holley Bolt Pattern [1/2 in. Tall Open Plenum]](https://www.jegs.com/images/mini_200/500/555/555-15495.jpg)
![Phenolic Carburetor Spacer with 4150/4160 Holley Bolt Pattern [1 in. Tall Open Plenum]](https://www.jegs.com/images/mini_200/500/555/555-15496.jpg)

![Phenolic Carburetor Spacer with 4150/4160 Holley Bolt Pattern [2 in. Tall Open Plenum]](https://www.jegs.com/images/mini_200/500/555/555-15497.jpg)

![Compact Billet Aluminum In-Line Fuel Filter, 2 5/16 in. Long [-6 AN Male/Female, Black]](https://www.jegs.com/images/mini_200/500/555/555-15031.jpg)