Street Heat Stage-3 POLLUTER Camshaft
• GM LS7 Engines
• Duration: 248 Int/262 Exh
• Lift: .652 in. Int/.646 in. Exh
• LSA: 113+7
  
  

  Tick Performance SH0037 Features:

  Tick Performance proudly offers Tick Performance Elite Series of Camshafts designed specifically for LS7 Engines! Using the latest and greatest technology available, we've put together a complete line of Camshafts that are designed to meet every goal, from mild to wild. Tick Performance Elite Series of Camshafts are all manufactured by Cam Motion and are updated with a new version every time an advancement in valvetrain technology becomes available, so they're ALWAYS cutting-edge! Although Tick Performance suggest measuring for piston-to-valve clearance during ANY camshaft install, every Elite Series Camshaft is designed to fit in a stock engine & stock heads with adequate clearance unless otherwise noted. These cams are designed to maximize power, reliability and valvetrain longevity.

  Tick Performance Street Heat Stage 3 POLLUTER Camshaft for LS7 Engines
  248/262 | .652”/.646” | LSA113+7

  Designed for: LS7 Engines (427ci)
  Basic Operating RPM Range: 2500-7200
  Expected Horsepower Gains: 50-70RWHP over the stock camshaft in a well-optimized setup
  Aftermarket Headers Required: Yes, Longtube Style
  Stall Converter Required: Yes, 4000+RPM
  Rear Gear Upgrade Required: Suggested for maximum performance (4.10+ for manual transmissions, 3.73+ for automatics)
  Works Well with Nitrous: Yes (shot size less than 250)
  Will Pass Most Smog Emissions: No
  

  For years, the Polluter V1 was Tick Performance flagship camshaft (sold only for LS1 & LS6 engines), known and respected industry-wide as a maximum effort heavy-hitter that absolutely LOVES nitrous. Tick Performance brand new Street Heat Stage 3 POLLUTER Camshaft for LS7 Engines successfully carries on the Polluter name and mixes it with the newest, most advanced technology available! The result? HUGE power gains, impressive valvetrain longevity and surprisingly good street manners (with a good dynotune, of course.) This camshaft (like all of Tick Performance Elite Series Camshafts) is designed to fit stock engine/cylinder head combinations without the need to clearance your pistons, but since it is a TIGHT fit, Tick Performance require that you verify piston-to-valve clearance during install. Tick Performance strongly suggest the use of Tick Performance Tick Performance Valvesprings (TP700DVSK) and hardened pushrods with this camshaft (sold separately.) Countless hours were spent developing this camshaft to perform precisely the way Tick Performance advertise, so as a result, changes to the LSA or any other specification of this camshaft are not available.

Emissions Note:

This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.

CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART