Polluter V1 Classic Camshaft
• GM LS1 & LS6 Engines
• Duration: 242 Int/244 Exh
• Lift: .61x in. Int/.61x in. Exh
• LSA: 112
  
  

  Tick Performance TPCC001 Features:

  It's hard to beat a classic! Since it's introduction to the market in 2008, the Tick Performance Polluter V1 camshaft has been well known and respected as the BIGGEST nitrous-friendly camshaft you can fit into a stock LS1 or LS6 without any piston-to-valve-clearance worries (although it's always smart to measure during installation.) It's been making great power, great torque and responding incredibly well to large doses of nitrous for years!

  Tick Performance Polluter V1 Classic Camshaft for LS1 & LS6 Engines
  242/244 | .61x”/.61x” | LSA112

  Designed for: LS1, LS6, LQ4 and LQ9 Engines (325-364ci) with Cathedral Port Heads (as they're equipped with stock)
  Basic Operating RPM Range: 3000-7000
  Expected Horsepower Gains: 50-70RWHP over the stock camshaft in a well-optimized setup
  Aftermarket Headers Required: Yes, Longtube Style
  Stall Converter Required: Yes, 4000+RPM
  Rear Gear Upgrade Required: Suggested for maximum performance (4.10+ for manual transmissions, 3.73+ for automatics)
  Works Well with Nitrous: Yes (shot size less than 250)
  Will Pass Most Smog Emissions: No
  

  When Tick Performance began testing Tick Performance Polluter V1 cam in 2008, one result was a huge surprise to us: the TORQUE! This cam made 417rwhp & 391rwtq in a regular, every day cam only 2001 Camaro SS with cheap headers and an LS6 intake. No bells, whistles, dyno tricks or crazy expensive parts: the Tick Performance Polluter Cam makes great numbers and drives surprisingly well with a good tune, too. Make sure to check out all the pictures on this page for miscellaneous dyno graphs, and make sure you check out all the videos on this page for a sample of the NASTY idle this camshaft provides.

  This camshaft is designed to fit stock engine/cylinder head combinations without the need to clearance your pistons, but since it is a TIGHT fit, Tick Performance require that you verify piston-to-valve clearance during install. Tick Performance strongly suggest the use of Tick Performance or Brian Tooley Racing Valvesprings and hardened pushrods with this camshaft (sold separately.) Countless hours were spent developing this camshaft to perform precisely the way Tick Performance advertise, so as a result, changes to the LSA or any other specification of this camshaft are not available.

Emissions Note:

This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.

CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART