Turbo Stage-3 Camshaft
• GM LS3 & L99 Engines
• Duration: 235 Int/243 Exh
• Lift: .635 in. Int/.613 in. Exh
• LSA: 116.5+6
  
  

  Tick Performance TPT0033 Features:

  Tick Performance proudly offers Tick Performance Elite Series of Camshafts designed specifically for LS3 & L99 Engines! Using the latest and greatest technology available, we've put together a complete line of Camshafts that are designed to meet every goal, from mild to wild. Tick Performance Elite Series of Camshafts are all manufactured by Cam Motion and are updated with a new version every time an advancement in valvetrain technology becomes available, so they're ALWAYS cutting-edge! Although Tick Performance suggest measuring for piston-to-valve clearance during ANY camshaft install, every Elite Series Camshaft is designed to fit in a stock engine & stock heads with adequate clearance unless otherwise noted. These cams are designed to maximize power, reliability and valvetrain longevity.

  Tick Performance Turbo Stage 3 Camshaft for LS3 & L99 Engines
  235/243 | .635”/.613” | LSA116.5+6

  Designed for: LS3, L92, LY6, L76 and L99 Engines with Square Port Heads (as they're equipped with stock)
  Basic Operating RPM Range: 2500-7000+
  Expected Horsepower Gains: 50-70RWHP over the stock camshaft in a well-optimized setup
  Stall Converter Required: Yes, 3800+RPM
  Rear Gear Upgrade Required: No
  Works Well with Nitrous: No, designed for turbocharged applications
  Will Pass Most Smog Emissions: No
  

  If you have the words "Go BIG or Go HOME" tattooed somewhere on your person, you've found the perfect camshaft for your turbocharged application! Tick Performance Tick Performance Turbo Stage 3 Camshaft is designed for guys utilizing up to a 111mm turbine wheel. This camshaft is perfect for 364-427" motors using HP88, HP91, S588, GT5018, GT5518 and many other turbochargers in this size range. Even though this is an “LS3” camshaft, it can be utilized in a cathedral port headed engine in the size ranges listed for this camshaft. This camshaft will not work in vehicles equipped with VVT or DOD. If your vehicle still has these systems, they will need to be deleted at the time of the camshaft install (parts sold separately.) Tick Performance strongly suggest the use of Tick Performance Tick/PAC Dual Valvesprings and hardened pushrods with this camshaft (also sold separately.) Hundreds of hours were spent developing this camshaft to perform precisely the way Tick Performance advertise, so as a result, changes to the LSA or any other specification of this camshaft are not available.

Emissions Note:

This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.

CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART