Made in USA
120-16510 D11 Caliper
InfoVehicle Info Needed
WILWOODPART NUMBER: 950-120-16510

120-16510 D11 Caliper

$30872
ShippingShips on 09/10/2026
Lowest PriceLowest Price Guarantee

    D11 Caliper
  • 1.62
  • .81/.94 Rotor
  • Anodized

    Wilwood 120-16510 Features:

    Wilwood's D11 4-piston calipers are a direct bolt-on replacement for original equipment Kelsey-Hayes calipers on 1965-67 Ford Mustang, Fairlane, Ranchero, Falcon, Comet, and Mercury Cougar. Forged billet aluminum bodies, internal fluid crossover, stainless steel pistons, and high-temperature seals end the rust, leaking, bore pitting and seal failures that plague the OE caliper design. D11 calipers use OE-style brake pads, and fit in stock location with original brackets and rotors. D11 calipers mount in the stock location over stock rotors and use the original type D11 brake pads. These calipers fit inside most production steel wheels and most of the later model alloy wheels. D11 calipers use the same overall piston volumes as the original calipers. Other than a new flexline with an 1/8 in.-27 NPT end for the new aluminum caliper, no other changes such as master cylinder output or front to rear bias adjustment are necessary. Wilwood's D11 four piston calipers are a direct bolt-on replacement for the original equipment Kelsey-Hayes calipers on all 1965-67 Ford Mustang, Fairlane, Ranchero, Falcon, Comet, and Mercury Cougar. Forged billet aluminum bodies, internal fluid crossover, stainless steel pistons, and high-temperature seals put an end to the rust, leaking, bore pitting and seal failures that plague the OE caliper design. D11 calipers can use factory-style brake pads, and fit in stock location with original brackets and rotors.

Part TypeDisc Brake Caliper
BrandWILWOOD
Package Height4.87
Package Width6.25
Package Length10.95
Weight5.2 PG
Weight5.200
Part CategoryPerformance Parts
Caliper Piston Quantity4
Mount LocationUniversal
Caliper ColorAnodize
Piston Diameter1.62 in.
Maximum Outside Diameter11.30 in.
Maximum Inside Diameter0.81 in.
Dust Boot IncludedNo
Mount Hole Center To Center7.00 in.
Rotor Thickness0.94 in.
Maximum Thickness0.94 in.
Component TypeD11 Caliper
Minimum Thickness0.81 in.
Mount TypeLug
Piston MaterialStainless
Part FitmentSemi Universal
Caliper FinishType III Anodize
Vendor Part Number120-16510
Package Qty1
Package TypeEA
No Questions
No Reviews
Some parts are not legal for use in California or other states with similar laws / regulations
p65 warning
Your Cart

Your shopping cart is empty!