FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 21811 - Edelbrock Performer Manifolds for Ford

Edelbrock 21811 - Edelbrock Performer Manifolds for Ford

Edelbrock#350-21811

Performer 351-W Intake Manifold
  • SB-Ford 351ci Windsor
  • 4-bbl Square-Bore Carb Flange (non-EGR)
  • Idle-5500 rpm
  • Polished Finish

    Edelbrock 21811 - Edelbrock Performer Manifolds for Ford Details

    Ford 351ci Windsor V8

    Designed for street 351ci Ford Windsor V8s. This intake manifold is for 351W V8s with OEM carburetor 1969-72 (1973 non-CA) except stock equipped EGR. Will not fit Boss 351. Aftermarket 4-bbl carburetors are not compatible with Ford Automatic Overdrive Transmission (AOD) unless used with Lokar throttle cable bracket & springs p/n 625-SRK-4000.

    Installation Notes:

  • Port exit dimensions: 1.10'' x 1.80''
  • Manifold height: (A) 3.40'' , (B) 4.75''
    Click here to determine carburetor pad height.
  • Recommended Intake Gaskets: JEGS p/n 555-210200
  • Choke block-off cover plate p/n 350-8981 included.

    Carburetor Recommendations:

    Edelbrock Performer 600cfm Carburetor p/n 350-1405.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841
  • carb acceptable to factory cruise control.
  • carb has manual choke only.
  • for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1491 (not for AOD).

    Edelbrock Performer 600cfm Carburetor p/n 350-1406.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • carb acceptable to factory cruise control.
  • for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1491 (not for AOD).

    Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1805.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841
  • carb acceptable to factory cruise control.
  • carb has manual choke only.
  • for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1491 (not for AOD).

    Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1806

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • carb acceptable to factory cruise control.
  • for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1491 (not for AOD).

  • Edelbrock 21811 - Edelbrock Performer Manifolds for Ford

    Idle-5500 RPM Power!

    Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response.

    Edelbrock 350-21811

    Engine Make/Size
    Ford 5.8L/351W
    RPM Range
    Idle -5500
    Number Of Carbs
    One
    Emission
    Without EGR
    Cylinder Head Type
    Standard
    Usage
    Street/Hi-Performance
    Position
    N/A
    Items You May Also Consider
    Only $242.99

    Ships
    Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.
    Edelbrock 1406 - Edelbrock Performer Carburetors
    Only $313.99

    Edelbrock 7220 - Edelbrock Intake Manifold Gaskets
    Only $20.99

    JEGS Performance Products 15840 - JEGS Carburetor Stud Kits
    Only $5.99

    JEGS Performance Products 15841 - JEGS Carburetor Stud Kits
    Only $6.99


    See All Items You Need