FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 2665K - Edelbrock Performer Manifolds for Ford

Edelbrock 2665K - Edelbrock Performer Manifolds for Ford

Edelbrock#350-2665K

Performer 351-4V Cleveland Intake Manifold w/Installation Kit
  • Ford 351ci 4V Cleveland
  • 4-bbl Square-Bore Carb Flange (non-EGR)
  • Idle-5500 rpm

    Edelbrock 2665K - Edelbrock Performer Manifolds for Ford Details

    Ford 351ci Cleveland V8

    This is a great value! These kits ensure that you'll get the job done right. Each kit includes an Edelbrock intake manifold, intake gaskets, carb gaskets, a tube of blue gasket sealer and we also throw in a set of carburetor studs.

    Performer 351-4V intake manifold is designed for street 351C and BOSS 351 Fords that came stock with 4V carb and heads. Will not fit Boss 302 or accept stock Motorcraft spread-bore carb. Valley width measures 6-31/32''.

    Installation Notes:

  • Port exit dimensions: 1.37'' x 2.15''
  • Manifold height: (A) 3.50'' , (B) 4.30''
    Click here to determine carburetor pad height.
  • Recommended Intake Gaskets: JEGS p/n 555-210206

    Carburetor Recommendations:

    Edelbrock Performer 600cfm Carburetor p/n 350-1405,
    Edelbrock Performer 750cfm Carburetor p/n 350-1407
    Edelbrock Performer 800cfm Carburetor p/n 350-1412
    Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1805,
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1812.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841
  • carb acceptable to factory cruise control.
  • carb has manual choke only.
  • for auto trans. use throttle lever adapter p/n 350-1483.

    Edelbrock Performer 600cfm Carburetor p/n 350-1406,
    Edelbrock Performer 750cfm Carburetor p/n 350-1411.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • carb acceptable to factory cruise control.
  • for auto trans. use throttle lever adapter p/n 350-1483.

    Edelbrock Performer 800cfm Carburetor p/n 350-1413,
    Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1806
    Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1813.

  • carb will work with non-EGR system
  • carb has no provision for evaporative canister,
  • Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841
  • carb acceptable to factory cruise control.
  • for auto trans. use throttle lever adapter p/n 350-1483.

  • Edelbrock 2665K - Edelbrock Performer Manifolds for Ford

    Idle-5500 RPM Power!

    Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response.

    Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.
    JEGS Performance Products 15840 - JEGS Carburetor Stud Kits
    Only $4.99

    JEGS Performance Products 15841 - JEGS Carburetor Stud Kits
    Only $5.99

    JEGS Performance Products 15842 - JEGS Carburetor Stud Kits
    Only $5.99

    JEGS Performance Products 15845 - JEGS Carburetor Stud Kits
    Only $8.99


    See All Items You Need