2181K - Edelbrock Performer Manifolds for Ford

Idle-5500 RPM Power!

Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response. Most Performer intakes are 50-state legal, when used with the correct carburetor and in the correct application.

View in Current Catalog

Complete list of Edelbrock Performer Manifolds for Ford

2181K - Edelbrock Performer Manifolds for Ford Details

Ford 351ci Windsor V8

This is a great value! These kits ensure that you'll get the job done right. Each kit includes an Edelbrock intake manifold, quality intake bolts, intake gaskets, carb gaskets, a tube of blue gasket sealer and we also throw in a set of carburetor studs.

Designed for street 351ci Ford Windsor V8s. This intke manifold is a stock replacement/street legal part for 351W V8s with OEM carburetor 1969-72 (1973 non-CA) except stock equipped EGR. Will not fit Boss 351. Aftermarket 4-bbl carburetors are not compatible with Ford Automatic Overdrive Transmission (AOD) unless used with Lokar throttle cable bracket & springs p/n 625-SRK-4000.

Installation Notes:

Port exit dimensions: 1.10'' x 1.80''

Manifold height: (A) 3.40'' , (B) 4.75''
Click here to determine carburetor pad height.

Use 12-bolt intake gasket set Edelbrock p/n 350-7220.

Van installations use OEM Ford ''van'' intake gasket set will fit early 16-bolt head with Ford 16-bolt intake gasket set.

Choke block-off cover plate p/n 350-8981 included.

Carburetor Recommendations:

Edelbrock Performer 600cfm Carburetor p/n 350-1405.

carb will work with non-EGR system

carb has no provision for evaporative canister,

carb requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit

carb acceptable to factory cruise control.

carb has manual choke only.

for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1491 (not for AOD).

Edelbrock Performer 600cfm Carburetor p/n 350-1406.

carb will work with non-EGR system

carb has no provision for evaporative canister,

carb acceptable to factory cruise control.

for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1491 (not for AOD).

Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1805.

carb will work with non-EGR system

carb has no provision for evaporative canister,

carb requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit

carb acceptable to factory cruise control.

carb has manual choke only.

for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1491 (not for AOD).

Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1806

carb will work with non-EGR system

carb has no provision for evaporative canister,

carb acceptable to factory cruise control.

for auto trans. use throttle lever adapter p/n 350-1483 and throttle cable plate kit p/n 350-1491 (not for AOD).

Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.

Home>> Back

Best Prices, Same Day Shipping, #1 in Customer Service, Largest Selection of Quality Performance Parts
	Search	Quick Order	eNewsletter Signup

VEHICLE SEARCH:

2181K - Edelbrock Performer Manifolds for Ford

Edelbrock #350-2181K

2181K - Edelbrock Performer Manifolds for Ford Details