Edelbrock 71761 - Edelbrock Performer RPM Manifolds & Kits for Chrysler

Edelbrock #350-71761

Performer RPM 340/360 Intake Manifold

Polished Finish

SB-Chrysler 340-360ci

Fit 318ci with 340/360 cylinder heads

4-bbl Square-Bore Carb Flange (non-EGR)

1500-6500 RPM Range

Accessories

Dyno Chart for Edelbrock 71761 - Edelbrock Performer RPM Manifolds & Kits for Chrysler

Installation Instructions for Edelbrock 71761 - Edelbrock Performer RPM Manifolds & Kits for Chrysler

Share |

Complete list of Edelbrock Performer RPM Manifolds & Kits for Chrysler

Details
Overview
Accessories

Edelbrock 71761 - Edelbrock Performer RPM Manifolds & Kits for Chrysler Details

Chrysler 318-360ci Small Block V8

Designed for 340-360 c.i.d. Chrysler V8s and 318 c.i.d. engines with 340-360 cylinder heads. Latest technology in dual-plane design results in both excellent low-rpm torque and outstanding high-rpm horsepower. Recommended for high-performance street, strip and fresh water marine applications. Accepts early-style waterneck only. Will not accept stock Thermo-Quad carburetor. Will not fit 1992 and later Magnum engines.

Installation Notes:

Port exit dimensions: 1.01'' x 2.17''

Manifold height: (A) 4.90'' , (B) 5.80''; Carb pad height = 5.35'' Click here to determine carburetor pad height.

Recommended Intake Gasket: JEGS p/n 555-210400 .

1979 & later rotary A/C compressor will not clear waterneck.

Carburetor Recommendations:
Edelbrock Performer 750cfm Carburetor p/n 350-1407
Edelbrock Performer 800cfm Carburetor p/n 350-1412
Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1812.

carb will work with non-EGR system

carb has no provision for evaporative canister,

Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841

carb requires automatic transmission rod extension kit p/n 350-8003 for 1/4'' rod or p/n 350-8004 for 5/16'' rod. Also use transmission kick-down linkage adapter kit p/n 350-8022 for 1977 vans

carb acceptable to factory cruise control.

carb has manual choke only.

use throttle lever adapter p/n 350-1481 for 1966-later vehicles.

Edelbrock Performer 800cfm Carburetor p/n 350-1413

carb will work with non-EGR system

carb has no provision for evaporative canister,

Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841

carb requires automatic transmission rod extension kit p/n 350-8003 for 1/4'' rod or p/n 350-8004 for 5/16'' rod. Also use transmission kick-down linkage adapter kit p/n 350-8022 for 1977 vans

carb acceptable to factory cruise control.

use throttle lever adapter p/n 350-1481 for 1966-later vehicles.

Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1813.

carb will work with non-EGR system

carb has no provision for evaporative canister,

carb requires automatic transmission rod extension kit p/n 350-8003 for 1/4'' rod or p/n 350-8004 for 5/16'' rod. Also use transmission kick-down linkage adapter kit p/n 350-8022 for 1977 vans

carb acceptable to factory cruise control.

use throttle lever adapter p/n 350-1481 for 1966-later vehicles.

1500-6500 RPM Power!

For the ultimate in street performance bolt on an Edelbrock Performer RPM manifold. These dual plane, high-rise intakes make incredible horsepower to 6500 rpm along with streetable torque for great throttle response. This broad power band makes Performer RPM ideal for street or strip. Their larger plenums and runners match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. They are intended for high-performance street or competition engines that run up to 6500 rpm. They are not for emissions-equipped engines. Performer RPM manifolds match Performer RPM camshaft and cylinder heads for outstanding performance.