Edelbrock 77929 - Edelbrock BB-Chrysler Victor Heads

Edelbrock #350-77929

BB-Chrysler Victor Aluminum Cylinder Head

280cc Intake Ports

75cc Combustion Chambers

2.200''Int/1.810'' Exh Valves

With Valves, Sold Individually

Installation Instructions for Edelbrock 77929 - Edelbrock BB-Chrysler Victor Heads

Share |

Complete list of Edelbrock BB-Chrysler Victor Heads

Details
Overview
Accessories

Edelbrock 77929 - Edelbrock BB-Chrysler Victor Heads Details

Victor BB-Chrysler Head

Note: These heads are supplied with valves, reamed and semi-finished valve stem guides, and no valve job. They will require final guide sizing and valve seat finishing before installation. These heads require offset rocker arms for the intake ports; use Hughes Engines .550'' offset intake rockers. The exhaust side will accept standard-spec rockers.

Edelbrock's Victor BB-Chrysler cylinder heads are some of the best standard port location heads available for those engines. These heads require the use of a special Edelbrock Valley Cover (#350-7798, sold separately below). Assembled heads are sold with valves only so that you can use the springs and retainers your cam manufacturer recommends.

Features:

280cc Intake Ports and 100cc Exhaust Ports

Intake Ports are Raised .650'' and Exhaust Ports are Raised .250''

2.200'' Intake Valves and 1.810'' Exhaust Valves

Fits Existing Victor Manifolds on Both High and Low Deck Engines

Standard 15° Valve Angles

Raised Valve Cover Rails

Dual-Quench 75cc Combustion Chambers

Can Be Matched to Max Wedge Ports