$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

Accelerator Pedals

Accelerator pedals set how much throttle your engine gets, so the right one shapes pedal feel, fit and response in your build. You'll find gas pedal assemblies in floor-mount, firewall-mount and drive-by-wire styles, plus direct-fit restoration pedals for classic Chevy, GMC and Mopar models. Narrow your choice by mounting style, linkage type and vehicle fitment using the guidance below.

Show More

How Do You Choose an Accelerator Pedal or Throttle Pedal Assembly?

Start with three questions: where does the pedal mount, how does it connect to the throttle, and do you need a direct-fit or universal part? Answer those and you've cut the list down fast.

A complete throttle pedal assembly typically gives you the arm, pad and pivot as one unit. It's the simplest path when you're replacing a worn original or building a pedal box from scratch. If you're rebuilding the setup you already have, browse throttle pedal assembly and pedal components for the supporting parts.

Before you order, measure the space under the dash and around the floorboard. Check that pedal travel lines up with your throttle's idle and wide-open positions, too. Need more than a gas pedal for the project? See the full range of car and truck pedals.

Floor-Mount vs Firewall-Mount Gas Pedals

A floor-mount gas pedal pivots from a base on the floorboard. A firewall-mount pedal, also called overhung or hanging, hangs from above like most factory setups. Pick the style that matches your linkage routing and the room you have under the dash.

Here are examples of each style in this category:

  • The XFMG-6098 Eliminator from the Lokar gas pedal lineup is a floor-mounted gas pedal.
  • The 72-615 from Tilton throttle pedals is an overhung, firewall-mount throttle pedal.
  • The Tilton 72-618 pairs brake and throttle in a 2-pedal underfoot assembly.
  • The 33720-B from Joes Racing Products pedals is a floor-mounted pull-back pedal in black anodized finish.

Firewall-mount pedals keep the floor clear and suit vehicles built around a hanging pedal. Floor-mount pedals help when there's no room up high or you're fabricating a custom floor.

Billet Gas Pedal vs Steel: Which Material Fits Your Build?

Choose billet aluminum when the pedal is on display and you want a machined, finished look. Choose steel when you want a traditional pedal arm and the interior styling matters less.

Billet pedals are machined from solid aluminum, which is lighter than steel. They often come polished or anodized to match other interior trim. Options include the JEGS billet gas pedal assembly 555-157416 with a rectangular polished-aluminum pad. You'll also find the Clayton Machine Works billet pedal MCP-P1 in a gray finish and the Joes Racing Products 33730-B billet-aluminum conventional throttle pedal.

If you prefer steel, the Lokar XSG-6007 is a steel throttle pedal assembly. Whichever material you pick, match the pad shape and finish to your brake pedal so the footwell looks consistent.

Drive-by-Wire Pedals for Modern Engine Swaps

If your engine uses an electronic throttle body, you need a drive-by-wire pedal. There's no cable between the pedal and the throttle. A sensor in the pedal reports its position to the engine controller, which opens the throttle electronically.

That makes the pedal part of your engine's electrical system. Match the pedal's connector and sensor type to your controller and wiring harness before you order. The Clayton Machine Works CDBW-GM01G accelerator pedal assembly is a drive-by-wire option in this category, so check its fitment details against your swap.

For background on how electronic throttle control works, read why modern engines use drive-by-wire throttles. Thinking about going back to a mechanical setup? Compare the tradeoffs of converting drive-by-wire to a cable throttle before you buy parts.

Restoration and Direct-Fit Gas Pedals for Classic Cars and Trucks

For a factory-correct restoration, choose a direct-fit gas pedal made for your exact year and model. It's designed to bolt into the original mounting points and work with the stock linkage, so you can skip fabrication and keep the factory look.

OER restoration pedals in this category include a 1967 Camaro V8 pedal assembly and a 1971-72 Mopar A/B/C/E-body pedal kit. OER also offers a 1966-1970 Mopar B-Body pedal pad, plus billet pedal sets for 1973-83 and 1984-96 Chevy/GMC trucks. Auto Metal Direct restoration parts include assemblies for 1970-72 Chevelle/El Camino and 1967 Camaro models.

A new pedal won't fix sloppy response if the linkage behind it is worn. OER lists 1968-69 Camaro accelerator rods, and you can find replacement throttle cables and linkage to finish the job.

Hot Rod and Universal Gas Pedals for Custom Builds

A universal gas pedal fits builds with no factory pedal to match, such as hot rods, race cars and custom swaps. You'll handle the mounting position, pedal angle and linkage geometry yourself, so plan the layout first.

The Joes Racing Products 33600-B is a 2.88 in. x 8.00 in. aluminum floor-mount pedal for this kind of build. Before you drill, set the pedal where your foot lands naturally. Confirm it clears the floor, transmission tunnel and brake pedal through full travel.

Then check that pedal travel opens the throttle fully without the linkage binding or bottoming out. For replacement pieces during the install, shop accelerator pedal components. Want a new look without swapping the whole pedal? Shop all gas pedal pads and covers to match your interior.

Vehicle

ADD A VEHICLE TO GUARANTEE PARTS FIT

See products that fit

Frequently Asked Questions About Accelerator Pedals

Is It Called a Gas Pedal or an Accelerator Pedal?

Both names describe the same part. "Accelerator pedal" is the technical term, "gas pedal" is the everyday one, and racers often say "throttle pedal." All three control how far the throttle opens.

What Are the Signs an Accelerator Pedal Is Going Bad?

On a mechanical pedal, watch for sticking, binding, a slow return to idle or play at the pivot. On a drive-by-wire pedal, a failing position sensor can cause hesitation, uneven response or a check engine light. If the pedal doesn't return to idle on its own, fix it before you drive again.

What's the Difference Between Top-Hinged and Bottom-Hinged Pedals?

A top-hinged pedal pivots from above, so your heel rests on the floor while your foot rocks forward. A bottom-hinged pedal pivots at its base, so your foot rests on the pad and moves with it. The choice mostly comes down to driving feel and the space in your footwell.

Do I Need a Cable or Rod Linkage for My Gas Pedal?

Use the linkage type your pedal and throttle are designed for. Cables route flexibly around obstacles, which helps in custom builds. Rods and bellcranks are common in older factory setups, so restorations usually stay with rods.

Can I Replace Just the Pedal Pad?

Yes, on many pedals you can swap the pad without replacing the arm. It's a quick fix for a worn, cracked or slippery pad. Confirm the new pad matches your pedal arm's shape and mounting before you order.

How Do I Confirm an Accelerator Pedal Fits My Vehicle?

Enter your vehicle's year, make and model in the vehicle selector to filter this category to parts listed for it. Then read the fitment tab on the product page to confirm engine and body details. Universal pedals won't list a specific vehicle, so compare mounting style, dimensions and linkage type instead.