Engine Stands
Engine stands bolt to the back of your block, and most let you rotate it 360 degrees to reach every side during a rebuild. This category covers stands rated at 1,000, 1,250, 1,500, 2,000 and 6,000 lb, including a geared rotating model and kit versions. You'll also find engine cradles for specific engine families, plus adapters, drip trays and replacement parts.
Show More
What Size Engine Stand Do You Need?
Pick an engine stand rated above the weight of your fully dressed engine. That weight includes the block plus the crank, rotating assembly, heads and intake. Leave some margin, since the bare block is only part of the load.
Small-block engines such as the SBC, Ford 302 and LS typically weigh 450 to 650 lb. A 750- or 1,000-lb stand is usually enough for them. A big-block Chevy or similar engine runs 650 to 800 lb, so a 1,000- or 1,500-lb stand is the recommended step up.
JEGS engine stands come in 1,000-, 1,250-, 1,500- and 2,000-lb ratings, so you can match the stand to the build. Want the full weight breakdown by engine type? Read how to choose the right engine stand capacity for your build.
Rotating vs. Geared Engine Stands: Which Should You Choose?
Both types let you turn the engine, so the choice comes down to how you want to control that rotation. Most stands use a 360-degree rotating head that you release, turn and lock in place. Locking pins or bolts hold the engine at the angle you need.
A geared rotating stand turns the head through a gear drive instead of free rotation. JEGS offers a geared rotating engine stand rated at 1,500 lb, which covers the big-block weight range. If your builds run heavy or you flip the engine often, compare it with a standard rotating stand before you buy.
Whichever style you pick, plan the rest of your tool list before teardown starts. These five engine rebuild tools every mechanic must have pair well with a rotating stand.
Engine Cradle vs. Engine Stand: What's the Difference?
An engine stand mounts to the rear of the block with adjustable arms that bolt to the bellhousing flange. An engine cradle is built for a specific engine family. Use a stand when you need to rotate the block, and use a cradle when the engine needs a fitted resting spot.
JEGS engine cradles are available for these engine families:
- Small-block and big-block Chevy, sold as a cradle and bag kit
- Big-block Ford 429/460
- Small-block Ford
- Small-block and big-block Mopar
- Oldsmobile
- GM LS, sold as a storage kit
Still deciding whether your project calls for a rebuild at all? Compare rebuilt engines and crate engines before you choose between a stand and a cradle. If the engine will sit for a while, the GM LS storage kit shows how a cradle doubles as storage.
Which Engine Stand Adapters and Accessories Do You Need?
Start with a drip tray, then add an engine stand adapter based on what you plan to mount. The right accessories keep your floor cleaner and let one stand handle more than engines. Here's what's available in this category:
- Drip tray to catch fluids under the mounted engine
- Axle housing adapter to mount a rear axle housing on your stand
- Lift plate and bag kit, sold with a JEGS 1,250-lb stand
- Short-block adapter, included with a low-profile ETS base unit
Yes, an engine stand can hold a rear axle housing. The JEGS Engine Stand Adapter for Axle Housings lets you put your stand to work on drivetrain projects too.
PRW offers two ETS base units with accessory kits. One is a low-profile version that adds the short-block adapter, which suits builds that start with a short block.
When Do You Need a Heavy-Duty Engine Stand?
Step up to a heavy-duty engine stand when you work on diesel engines or anything heavier than a typical big block. Diesel engines can exceed 900 lb. Stands rated at 1,500 lb or higher are commonly used for them.
The JEGS 2,000-lb engine stand and 2,000-lb kit give you extra margin over that diesel range. They also leave room for a dressed big block with every accessory bolted on. Remember to count the heads, intake and rotating assembly when you compare ratings.
Professional and industrial shops use 6,000-lb stands for commercial diesel and heavy-equipment engines. The OTC Tools 6,000-lb engine stand comes with an adapter for that class of work. If you're outfitting a full service bay, browse the rest of our shop equipment to round out your setup.
What Tools Pair With an Engine Rebuild Stand?
An engine rebuild stand is one part of a complete rebuild setup. You need a way to lift the engine, tools to build it and a way to clean parts. Plan all three before you pull the engine.
Use engine cranes and hoists to lift the engine out of the vehicle and onto the stand. Match the lifting capacity to your engine weight, just like you did with the stand. Tighten every mounting bolt before you release the hoist's load.
Once the engine is mounted, specialty engine building tools and supplies help with teardown and assembly. Before you reassemble anything, clean components in one of our parts washers. Keep the drip tray under the stand to catch fluids during teardown.
ADD A VEHICLE TO GUARANTEE PARTS FIT
See products that fit
ADD A VEHICLE TO GUARANTEE PARTS FIT
See products that fit

JEGS
Two-Piece Engine Storage Stand for Small Block and Big Block Chevrolet Engine
Part Number: 555-80063

JEGS
Two-Piece Engine Storage Stand for Small Block and Big Block Chevrolet Engine
Part Number: 555-80063
Frequently Asked Questions About Engine Stands
How do you rotate an engine on a stand safely?
Confirm the stand's capacity exceeds the engine weight and tighten every mounting bolt first. Verify the engine is balanced before you rotate it, then turn it slowly. Make sure the locking pin is engaged once you reach the position you want.
Will one engine stand fit different engine blocks?
Usually, yes. The adjustable arms are designed to fit different block bolt patterns, so one stand can handle more than one engine. Check that the capacity still exceeds the weight of each engine you plan to mount.
Should you buy an engine stand kit or the stand alone?
A kit makes sense if you want accessories included with your stand. JEGS offers kit versions of its 1,250- and 2,000-lb stands, including a 1,250-lb stand with a lift plate and bag kit. Check each kit listing for its exact contents before you order.
What replacement parts are available for engine stands?
JEGS stocks replacement parts that keep a stand in service, including 3-in. wheels, turning plates and heads, shifting arms and hardware kits. Chrome arms are also available for the JEGS rotating stand. Match each part to your stand model before ordering.
![Geared Rotating Engine Stand [1500 lb. Capacity]](https://www.jegs.com/images/mini_100/500/555/555-80102.jpg)
![Geared Rotating Engine Stand [1500 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80102.jpg)




![Engine Stand [1000 lb. Capacity]](https://www.jegs.com/images/mini_100/500/555/555-80040.jpg)
![Engine Stand [1000 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80040.jpg)


































![Engine Stand, Lift Plate & Bag Kit [1250 lb. Capacity]](https://www.jegs.com/images/mini_100/500/555/555-80041k.jpg)
![Engine Stand, Lift Plate & Bag Kit [1250 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80041k.jpg)
![Engine Stand Kit [1250 lb. Capacity]](https://www.jegs.com/images/mini_100/500/555/555-80041k1.jpg)
![Engine Stand Kit [1250 lb. Capacity]](https://www.jegs.com/images/mini_200/500/555/555-80041k1.jpg)