Items You Need
| Ratings |
|---|
| Price |
| Brand |
Carb
Edelbrock 28110 Victor Jr. AMC Intake Manifold
This Edelbrock Victor Jr intake manifold for AMC engines outperforms the old Torker design in overall performance figures, with an additional 10HP right out of the box. Torker was rated at 3500-7500 RPM whereas the Victor Jr is estimated at 3500-8500 RPM, making this a true high RPM racing intake manifold.
Edelbrock 28110 Victor Jr. AMC Intake Manifold Features:
- Designed for 1970-1991 AMC 304, 360, 390 & 401 V8 carbureted engines
- Will also work on 290, 343 & early 390 engines with late-model 1970-1991 Dog Leg port heads
- Single plane design for optimal airflow and best fuel distribution
- 10-HP gain over the AMC Torker part# 2730
- 3500 - 8500 RPM Range
- Height = 5.740 in.
- Carb angle = 0 degrees
- Port Size: R=1.160 in., F= .970 in., W=1.060 in., H=2.130 in.
- Fits 4150 Carburetor Flange
- Designed for non-emission-controlled applications
- Standard oil fill hole
- Raised PCV boss for better oil control
Edelbrock 28110 Victor Jr. AMC Intake Manifold Notes:
- The customer must install the original intake oil baffle to the bottom of the intake
- No provisions for exhaust-heated chokes
- No heat crossover
- No provisions for factory throttle bracket
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.