- Jegs
- Fuel, Carbs & Intakes
- Intake Manifold
- Carburetor Intake Manifolds
- Edelbrock Super Victor Series Big Block Chevy Intake Manifolds
Edelbrock Super Victor BBC Intake Manifold Big-Block Chevy 10.2 Tall Deck Carb
350-2916
| Ratings |
|---|
| Price |
| Brand |
Super Victor BBC Intake Manifolds
Technical Specs:
- Big Block Chevy Tall Deck (10.2") Blocks
- Port Exit Dimensions: 1.55" w x 2.30" h
- Recommended Intake Gasket; Jegs 555-210100 or Fel-Pro 375-1275
- 4500 Carburetor Flange
- Manifold Height: (A) 6.95", (B) 6.95"
- Manifold Flange Reference: (R) 1.30", (F) 1.00", (W) 1.55", (H) 2.30", (CH) 6.95", (CA) 0°
Specifications:
Super Victor Race Series
3500-8500+ RPM
Single-plane, high-rise intakes designed for maximum race-winning power at higher engine speeds. Engineered in conjunction with leading engine builders and racers from all forms of competition these intakes incorporate modern design with the latest racing technology. With selections including oval or rectangle port, standard or tall deck, standard or raised port configurations to match aftermarket cylinder heads, and even a version for EFI (Electronic Fuel Injection) conversions; you are certain to find an Edelbrock Super Victor intake that fits your specific needs.
Super Victor BBC
This single-plane manifold was designed for Chevy big-blocks with rectangular port cylinder heads. It is ideal for 500+ cubic-inches or any big-block drag race engine with high air flow requirements. In dyno testing, Super Victor, p/n 350-2927, outperformed the competition out-of-the-box with just a port match and minor blending of critical surfaces. Super Victor Tall-Deck, p/n 350-2916, can be used on tall-deck (10.2") engine blocks without manifold spacers and accepts standard height distributors.
Features:
- A356 Aluminum Construction
- 4500-series Carburetor Flange
- Designed for Use with Big-Block Chevy Conventional Port Cylinder Heads
- Standard (9.8") and Tall (10.2") Deck Manifolds use Standard Height Big-Block Chevy Distributor
Super Victor II
The Super Victor II single-plane intake manifolds are designed for use with large cubic inch big-block Chevy engines using the latest design rectangle port cylinder heads with conventional port locations. They are ideal for any 1,000+ horsepower drag race engine with high air flow requirements. All manifolds have an extra large carburetor outer flange with a 5" x 5" opening to fit high flow carburetors and throttle stops. Modern casting techniques create smooth, thin, extended divider walls for "out of the box" performance, just port match and go!
Features:
- 350-2895 features thicker flanges resulting with .080" increase in port exit height.
- 350-2896 features an improved runner design with an incredible 5.0 square-inches of runner area in the plenum.
- 350-28962 is CNC port matched for Edelbrock/Musi Victor 24° CNC 377cc cylinder heads 350-61409.
- 350-2897 features 5.38 square-inches of runner area at the plenum. Designed for use on tall-deck (10.2") blocks without manifold spacers and accepts standard height distributors.
- 350-28972 is CNC port matched for use with head 350-61409 and features 5.38 square inches of runner area at the plenum.
- 350-2898 is based on 350-2897 with special machining, increasing port exits by .250" for raised port heads.
- 350-28978 is machined for use on tall-deck (10.2") blocks with Brodix SR20 cylinder heads with no modifications out of the box. Accepts standard height distributors. Slip collar distributor recommended for this manifold when used on short deck blocks.
Super Victor BBC Large Oval Port
This manifold for big-block Chevy is a variation of the Super Victor BBC intake manifold, p/n 350-2927, with a 3/4" radius in the ports, producing a port exit compatible with current large oval port heads such as the Edelbrock Victor 24° CNC cylinder head, p/n 350-61409. It shares the performance attributes of the original Super Victor BBC intake manifold, p/n 350-2927, but can be ported to fit a wider variety of cylinder head shapes and locations, making it especially suitable for use with custom CNC ported heads on engines with high air flow requirements.
Features:
- A356 Aluminum Construction
- 4500-series Carburetor Flange
- Designed for Use with Big-Block Chevy Conventional Port Cylinder Heads
- 3/4" Radius Filled-Corner Runners Provide Greater Port Matching Capabilities with a Wide Variety of Cylinder Heads
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.