FITech Fuel Injection 30012 Go EFI-8 Power Adder Plus 1200 HP Throttle Body System Basic Kit [Matte Black]
546-30012
Product Q&A
View Now
![30012 Go EFI-8 Power Adder Plus 1200 HP Throttle Body System Basic Kit [Matte Black]](http://www.jegs.com/images/photos/500/546/546-30012.jpg "30012 Go EFI-8 Power Adder Plus 1200 HP Throttle Body System Basic Kit [Matte Black]")
Items You Need
| Ratings |
|---|
| Price |
| Brand |
Matte Black Finish
FiTech 30012 Go EFI-8 Power Adder Plus 1200 HP Throttle Body System Basic Kit
The Go EFI 8 1200 HP (Power Adder Plus) is the ultimate system for the serious power builder. This system features 8 high-flow injectors and is capable of fueling 1200HP! The Go EFI 8 1200HP is FiTech's top of the line system and comes with all of the data-logging, and pro-tuning software as standard features. Plus the Annular Discharge design is increased to 20 jet streams to handle the monster flow of this unit!
This system is capable of 25lbs of boost right out of the box and can be used in a blow thru turbo or blower application – or on a single roots style supercharger. You can also run a single stage of wet nitrous and control your A/F as well as ignition timing. **This kit is suitable for higher horsepower engines while equally at home on your daily driver 383.***Works from 250-1200HP! ***
Hand-Held Controller Quick Start Guide
atures:
- Eight Precision Flow-Matched Injectors
- Supports up to 1,200 HP
- 4-Gig Data Logging
- 2.5 Bar Internal MAP Sensor
- Nitrous Control with Safety Features and Accessories for Nitrous Tuning
- Nitrous and Boost Specific Target Air Flow Ratio Options
- Boost and Nitrous Timing Retard Strategies
- Adjust and Control Ignition Timing with Touch Screen Controller
- Optimize Air/Fuel Ratios
- Works with a Capacitive Discharge Ignition Box to Control Timing (not required)
- Built-in Fuel Pressure Regulator
- Self-Tuning
- Bosch 4.2 Wide Band O2 Sensor
- ECU is Mounted on the Throttle Body
- Universal Base Fits any 4-bbl Intake Manifold
- Voltage Control Fuel Pump Control
- Wet Flow Technology
- Swirl Spray Annular Discharge Design
- Dual Fan Control
- Inlet Fitting: 9/16 in. -24 to 6AN
- Return Fitting: 10 mm x 1.25 to 6AN
- Applications: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, Etc. engines making 250 HP up to 1200 HP with a 4-barrel intake manifold.
- Replacement for any 4-barrel carburetors for engines with 250 HP up to 1200 HP.
- Use the same size air cleaner you would normally use for your 4-barrel carburetor.
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Specifications:
Will this work on a turbo Ls?
Is this e85 compatible? Looking at a blow thru application, does it have enough injector for 1200 hp on that fuel?
What distributor would I need to utilize the timing control on the fitech system
I am building a 383 stroker SBC twin turbo. Motor will produce around 475hp NA but will be running between 14 &18 lb of boost for a target HP of 1000 + or - Does the system have built in boost control or will i need a separate boost controller?
If I bought this system with the intention of adding a supercharger at a later date, but not wanting to buy a system now and a different one later, would it work ok on an n/a build with around 550hp or is that too little of its total capacity?
How well does it read fuel / air with 107 lsa cams, & 37 degrees overlap, & only 5 inches of vacuum?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.