Hooker Headers Blackheart Gen III Hemi Swap Shorty Log Style Headers [Multi-Fit Application]
520-BH2375
Product Q&A
View Now
![Blackheart Gen III Hemi Swap Shorty Log Style Headers [Multi-Fit Application]](http://www.jegs.com/images/photos/500/520/520-bh2375.jpg "Blackheart Gen III Hemi Swap Shorty Log Style Headers [Multi-Fit Application]")
Items You Need
Mopar Multi-Fit Applications
Hooker Blackheart BH2375 Gen III Hemi Swap Log Style Headers:
- Applications with limited clearance using Gen III Hemi engines 5.7L, 6.1L, 6.2L, and 6.4L
- Confirmed vehicle fitment:
- 1966-1972 Mopar B-Body w/o power steering (reduced head steering box cover bolt recommended)
- 1970-1974 Mopar E-Body w/o power steering (reduced head steering box cover bolt recommended)
- 1972-1993 Dodge D100/150 2wd Trucks
- 1987-1996 Dodge Dakota 2wd V6/V8 Trucks
- 1997-2004 Dodge Dakota 2wd V6/V8 Trucks (clearancing of upper control arm is recommended)
- Compatible transmissions:
- A727, 46RE, 46RH, 545RFE, NAG1, 8HP70 Automatic transmissions
- TR6060 Manual transmission
- Requires Hooker Blackheart Engine Mounts (sold separately)
- Requires Hooker Blackheart Transmission Crossmember and Correct Transmission Mount Adapter (sold separately)
- 2003-2008 5.7L Hemi engines use JEGS Header Gaskets 555-211152 (sold separately) or equivalent
- Current D-port engines require JBA 1965 header gasket set (sold separately) or equivalent
- Current 5.7L and 6.4L engines with EGR and heat shield use Crown Automotive 50454955AA left manifold gasket and 50454956AA right manifold gasket (both sold separately) or equivalent
- Provide clearance for the brake booster, steering shaft, steering box, and both left and right mounted starters
- Corrosion-resistant 18-Gauge 304 Stainless Steel
- 1 3/4 in. Primary tubes with 2.5 in. 2-Bolt collector
Emissions: This product is engineered to facilitate the installation of a later model, emissions-friendly engine into a vintage / classic vehicle. Federal guidelines indicate that an engine swap is allowable if one or more of the following conditions apply.
- If there is a reasonable basis for knowing that emissions are not adversely affected as described in the EPA Tampering Policy dated November 23rd, 2020
- The resulting vehicle is identical (with regard to all emissions related parts, engine design parameters and engine calibrations) to a certified configuration of the same or newer model year as the vehicle chassis
- The vehicle is a uncontrolled vehicle
- Vehicles that were manufactured before emission control regulations took effect are called uncontrolled vehicles
- Aftermarket parts regulations and anti-tampering laws do not apply to these vehicles
- An EO legal engine swap kit is utilized (such as a GM EROD)
- The vehicle is being used for Competition Use Only
- Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street
Specifications:
Will these fit a 2012 ram 1500 with 5.7 hemi,or are they engine swap only
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.