Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
Product Discontinued
Currently Unavailable
This product is no longer available. Please call customer service for assistance at 1-800-345-4545.
1-3/4" Tubes
- S10 Race Headers
- 1982-2004 S10 (2WD Only)
- 1983-94 Blazer (2WD Only)
- 1982-91 S15/Jimmy (2WD Only)
- 283-400ci
- Fenderwell Exit
- 1-3/4" Tube Diameter
- 3" Collector Diameter
- Uncoated
Not legal for sale or use in California on pollution controlled motor vehicles. All Tubes on S10 headers are fenderwell exit. Race Car Hedder- Slip-on Collector. Flange may need to be cut between ports to install. Do not cut between twin ports. Must use Trans-Dapt #9906 conversion motor mounts with 2.8L frame mounts. Fits new angle plug heads, w/ raised exhaust ports.
Note: Does not fit factory brake booster. 1986 Cavalier Z24 brake booster will provide clearance.
- Hedman Husler Engine Race Headers are designed to fit 1982-2004 Chevy S10, S15, and Jimmy trucks with small block Chevy V8.Special Notes
- For S10 with 2.8L engines, Motor Mount 969-9926 is required
- For S10 with full-length headers, Motor Mount 969-4689 is required
- S10 with full-length headers must use GM TH350 transmission with 168-tooth flexplate
Part TypeHeader
Product LineHedman Husler S10 Race Headers
BrandHEDMAN HUSLER
Package Height14.0
Package Width21.0
Package Length48.0
Weight31.15 PG
Part CategoryPerformance Parts
Header FinishNatural
Tube DirectionDown Swept
QuantitySold as a pair
Bolts/Studs IncludedYes
Transmission Mount IncludedNo
Header MaterialSteel
Gaskets IncludedYes
Weld-UpNo
Collector AttachmentSlip fit
Flange StyleStandard
TunedNo
Collector Diameter3 in (76.2 mm)
Motor Mounts IncludedNo
Part FitmentSemi Universal
Reducers IncludedNo
ApplicationAutomotive
Primary Tube Gauge18-gauge
Header StyleFenderwell
Cross Over Pipe IncludedNo
Catalytic Converter(S) IncludedNo
Primary Tube Diameter1.75 in (44.5 mm)
Vendor Part Number65853
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
JEGS
Exhaust & Header Wrap 2 in. x 50 ft. x 1/16 in. Thick
Part Number : 555-32057
$4899$53.99
You Save$5.00
JEGS
Exhaust & Header Wrap 1 in. x 50 ft. x 1/16 in. Thick
Part Number : 555-32062
$2799$30.79
You Save$2.80
![Spark Plug Wire Boot Guards, Black [Set of 8]](https://www.jegs.com/images/mini_200/500/555/555-40300.jpg)
![Spark Plug Wire Boot Guards, Red [Set of 8]](https://www.jegs.com/images/mini_200/500/555/555-40302.jpg)
![Spark Plug Wire Boot Guards, Blue [Set of 8]](https://www.jegs.com/images/mini_200/500/555/555-40304.jpg)
![Spark Plug Wire Boot Guards, Silver [Set of 8]](https://www.jegs.com/images/mini_200/500/555/555-40310.jpg)
JEGS
Part Number : 555-32057
$4899$53.99
You Save$5.00
JEGS
Part Number : 555-32062
$2799$30.79
You Save$2.80
Some parts are not legal for use in California or other states with similar laws / regulations
