Master Battery Disconnect Switches
- Single Pole, Two Positions: Off-On; Disconnects battery circuit only.
- UL listed: UL listed Rating: 12 V DC.
- Rating: 12V DC; 20 amps continuous, 125 amps intermittent 15 sec. On, 5 min. Off.
- Actuators: Die Cast Single Throw lever.
- Mounting Stem: Brass, 3/4 in.-16 thread, 23/32 in. long, fits up to 3/16 in. thick panel.
- Terminals: (2) 3/8 in.-24 thread copper studs.
- Case: Plated steel.
- Installation: Through hole - Clearance for 3/4 in. dia. mounting stem.
- Contacts: Copper.
- (1) Disconnect Switch
- (1) Switch lever
- (1) # 8 Switch Lever Screw
- (2) 3/8 in.-24 thread Brass Terminal Nuts
- (2) 3/8 in. Terminal Lock Washers
Save Your Battery with a Turn of a Switch
JEGS Battery Disconnect Switches are designed to cut-off electrical power to help against electrical fires and offers theft protection when your vehicle is not in use. They are simple to install and give you the ability to cut power at a moment's notice. Disconnect Switches are mandated by the NHRA for Racing Vehicles equipt with alternators. Available in various combinations to fit your vehicle application.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.