![Painted Long Tube Headers for 1963-1982 Chevrolet Corvette [Small Block Chevy 265-400 ci]](https://www.jegs.com/images/mini_750/500/555/555-30054.jpg)
JEGSPART NUMBER: 555-30054
Painted Long Tube Headers for 1963-1982 Chevrolet Corvette [Small Block Chevy 265-400 ci]
$23999$263.99You Save$24.00
More than 10 availableSmall Block Chevy
Painted Long Tube HeadersSmall Block Chevy 265-400 ci 1963-1982 Chevy Corvette 1.625 in. O.D. Primary Tubes 3 in. Collector to 2.500 in. O.D. Reducers
JEGS 555-30054 Painted Long Tube Headers Features:
- Must modify stock exhaust to retain catalytic converter(s)
- Will not fit with A.I.R. pump
- Installation on vehicles 1978 and earlier with air conditioning will require purchase of 555-30782 bracket
- 1979 and later vehicles equipped with short compressor will re-use the original bracket
Special Exhaust Headers Notes:
- Due to variations in engine and vehicle configurations, installation of aftermarket headers may require minor modifications
- Common adjustments include power-steering or A/C bracket relocation, dipstick tube modification, or clearance for steering shaft and clutch linkage
- Inspect for worn or collapsed motor mounts, and verify clearance for spark plugs, wires, brake lines, and transmission or fuel lines
- Always test-fit headers before painting or coating to ensure proper alignment and clearance
- Re-torque after initial heat cycles
| Automatic | Standard | ||
| Column | Floor | Column | Floor |
| No | Yes | No | Yes |
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Part TypeHeader
BrandJEGS
Package Height9.3
Package Width19.3
Package Length37.0
Weight25.5 PG
Part CategoryPerformance Parts
Header Flange Thickness0.313 in (7.95 mm)
Header FinishBlack
Tube DirectionDown Swept
Cylinder Head Port ShapeRound
Transmission Mount IncludedNo
Header MaterialSteel
Gaskets IncludedYes
Weld-UpNo
Collector Attachment3-bolt flange
Flange StyleStandard
TunedNo
Collector Diameter3 in (76.2 mm)
Motor Mounts IncludedNo
Part FitmentSemi Universal
Reducers IncludedYes
Primary Tube Gauge16-gauge
Header StyleFull-length
Cross Over Pipe IncludedNo
Catalytic Converter(S) IncludedNo
Primary Tube Diameter1.625 in (41.3 mm)
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
ITEM YOU MAY ALSO CONSIDER
EASY KITS
REPLACEMENT PARTS
Some parts are not legal for use in California or other states with similar laws / regulations






![Spark Plug Wire Boot Guards, Black [Set of 8]](https://www.jegs.com/images/mini_200/500/555/555-40300.jpg)
![Spark Plug Wire Boot Guards, Red [Set of 8]](https://www.jegs.com/images/mini_200/500/555/555-40302.jpg)
![Spark Plug Wire Boot Guards, Blue [Set of 8]](https://www.jegs.com/images/mini_200/500/555/555-40304.jpg)
![Spark Plug Wire Boot Guards, Silver [Set of 8]](https://www.jegs.com/images/mini_200/500/555/555-40310.jpg)
![Long Tube Header for 1963-1974 Chevy Corvette [Painted]](https://www.jegs.com/images/mini_200/300/387/387-11106.jpg)

![Long Tube Headers and Header Wrap Kit for 1963-1982 Chevrolet Corvette [Small Block Chevy 265-400 ci]](https://www.jegs.com/images/mini_200/500/555/555-30054k4.jpg)
![Long Tube Headers and Header Wrap Kit for 1963-1982 Chevrolet Corvette [Small Block Chevy 265-400 ci]](https://www.jegs.com/images/mini_200/500/555/555-30054k3.jpg)

![Steel Reducers without O2 Fittings [3 in. Collector to 2 1/2 in. O.D.]](https://www.jegs.com/images/mini_200/500/555/555-30004.jpg)
