GM Truck, Small Block Chevy
- 1-1/2 “ mandrel bent and fully tig welded primary tubes, thick 5/16" flanges for a leak-free seal, and 3” collectors for small block chevrolet including 283, 307, 327, 350, 400 and others from the popular platform
- Black painted finish for great looks and long life
- Includes gaskets, reducers, & hardware to complete your project
- For cylinder heads with straight spark plug design only
Note: Customers must modify stock exhaust to retain catalytic converter(s). Applications with oxygen sensors will require the purchase of reducers with O2 fittings or install o2 bungs. These headers will not fit with A.I.R. pump or angle plug heads. Pre-70 vehicles with exhaust mounted alternator/generator will require the purchase of a 555-30780 bracket. May require clutch linkage modifications. Installation on vehicles 78 and earlier with air conditioning will require the purchase of a 555-30782 bracket. 79 and later vehicles equipped with a short compressor will re-use the original bracket. Not legal for sale or use in California on pollution-controlled motor vehicles.
will these fit 77 chevy k10 custom deluxe 5.7l 4x4
Will they fit 1978 k20 4wd
Will this fit my 1990 Chevrolet k5 blazer 4x4?
Would these fit my 97 c1500?
I have a 1986 truck with a vortec 5.7 Carb swap and i have ac alteraror all the front of a 1998 5.7 This headers works? The transmision is a 4+R manual trans
will these headers fit my 1985 c10 with an automatic transmission and a first gen 350 small block chevy?
Will these fit my 1990 Chevy Cheyenne 3/4Ton with a Holley Carb conversion. K2500 Model
Will these hang below the frame rails on my 66 c 10?
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.