Unrivaled Customer Service
And Expert Tech Advice!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

JEGS Electric Exhaust Cutouts for Dual Exhaust 2.5"

JEGS 30881


jegs shipping
FREE Shipping
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
JEGS Electric Exhaust Cutouts for Dual Exhaust 2.5" $278.94
2.5'' Electric Exhaust Cutouts
  • Dual Exhaust
  • Gear Reduction Motor
  • Stainless Steel Motor Shaft & Butterfly
  • Aluminum Housing
  • 2/pkg
  • 15' Waterproof Wiring Harness w/ Rocker Switch
  • Quick-Clip Connectors

  • JEGS 30881 Details


    JEGS Electric Exhaust Cutouts eliminate the need to uncap your cutouts every time you arrive at the track and recap them before leaving. Go from closed to open or open to closed with just the flip of a switch.


    • Available for single or dual exhaust systems
    • Stainless steel motor shaft
    • Stainless steel butterfly
    • Gear reduction drive motor totally enclosed in aluminum housing
    • Aluminum housing flange
    • Easy-to-read rocker switch
    • Slotted bolt holes for mounting ease
    • 15' waterproof wiring harness and quick-clip connectors included

    Flanged Cutout Pipe(s) required for installation:

    JEGS EZ Kits are designed by JEGS professionals to ensure that you get all the correct parts you need.

    30881 - JEGS Electric Exhaust Cutouts is rated 3.8 out of 5 by 5.
    Rated 5 out of 5 by from Perfect on BMW M3 Bought these to be able to modulate the sound of a GTHaus Meisterschaft exhaust on my 2011 BMW E92 M3. Install was easy, plenty of wire in the kit, and actual cutouts and motor housing seem very well constructed.
    Date published: 2017-07-04
    Date published: 2016-05-06
    Rated 3 out of 5 by from 2nd time ordering from Jegs this is the second product I ordered from Jegs and I have to say I am not real impressed I do like the cutouts, however they do not close all the way I actually had to stick a long screwdriver up inside and push them closed. I tried to look to see if I could adjust them but I have not found anything yet it would be nice if someone would tell me how to adjust to close all the way other than that they seem ok
    Date published: 2018-08-03
    Rated 3 out of 5 by from Worked ok This is the third set I've had. First set one motor failed after 9 months. Kegs has great service and warranted them. The second set I damaged. The crest of the road on the intersection I went through caused my car to bottom out and bent them. I don't have experience with another brand but these are much cheaper. But I do feel it comes at a bit of a price. When closed you can hear a little but a leak, it doesn't bother me but it may some. Also, the housing is a little bulky so if you car is lower you may run the risk of hitting the housing for the valves. That's my experience, hope it helps.
    Date published: 2017-12-16
    Rated 3 out of 5 by from Good price I've used these units before and have had good success . On this order one of the weather pac plugs was broken on one of the motors. I had to replace it at my expense.
    Date published: 2016-06-22
    • y_2018, m_8, d_19, h_1
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_5
    • loc_en_US, sid_10001_10001_3439601, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Are these waterproof? As in, if I wade through a river, will this get ruined? The “waterproof wiring harness” makes me wonder if you are saying the unit is waterproof or just the wires. 

    Asked by: Defender 110
    The interior switches are not waterproof, but all of the exterior components are, wiring , connectors, motors.
    Answered by: Rusty B
    Date published: 2018-06-07

    I have a 97 gmc Sierra with patriot longtube headers and they have a 2 1/2 inch collector while my actual exhaust pipes are 3 inch, I would get the 2 1/2 am I right. My header part number is h8059 would it bolt up?

    Asked by: Tyler_followell
    No, you would want the 3" version because these mount to the exhaust pipes, not the collector, using an inline splice such as 555-30752. The complete kit to make it happen in your application is 555-30883k.
    Answered by: Matt_B
    Date published: 2018-03-10

    Close can the solenoid be to the exhaust pipe

    Asked by: Revdennis
    These kits use electric motors and can be within an inch or so of the pipes.
    Answered by: Rusty B
    Date published: 2017-12-13

    Does the switch fully open and close the flaps without holding the switch?

    Asked by: Billy C
    You hold the switch to open and hold it to close, it works easily.
    Answered by: Rusty B
    Date published: 2017-11-29

    Do these have a warranty?

    Asked by: Lunchbox nc
    These are warranted for 1 year from date of purchase.
    Answered by: Jon Jegs Tech
    Date published: 2017-11-28

    Do these have steel gears and will they bolt up to part # 10784 without a problem. Thanks.

    Asked by: Ron72
    These have steel gears and will bolt up to the Magnaflow Race Ready cutouts.
    Answered by: Rusty B
    Date published: 2017-10-17
    • y_2018, m_8, d_19, h_1CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_6
    • loc_en_US, sid_10001_10001_3439601, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs
    Items You Need
    Some parts are not legal for use in California or other states with similar laws / regulations