- Converter diameter may vary based on Core Availability
- Fits transmissions that require lockup converters only
- 10.750 in. Diameter bolt circle flexplate required
- For Big Block applications, use JEGS XHD Converters
|Performance Torque Converter General Application Chart *|
|Rear Gear Ratio||Engine RPM Range & Compression Ratio||Converter RPM Stall Speeds **|
|Stock to 260°||Stock to 3.23||1000-4600|
8 to 9.5
|1500 to 1700|
|Stock to 265°||Stock to 3.23||1400-5000|
8 to 9.5
|1600 to 1800|
|265° to 280°||3.00 to 3.73||1600-6000|
9.5 to 10.5
|2200 to 2400|
|280° to 300°||3.55 to 4.56||2000-6500|
9.5 to 11
|3000 to 3400|
|280° to 310°||3.73 to 4.88||2800-7000|
10 to 11.5
|3500 to 3800|
10.5 to 12
* This chart is a guideline. The stall speed may vary in your application.
** Recommended for use with Small Block engines only
Quality Converters at Economical Prices
JEGS torque converters are economically priced and quality built units with the street enthusiast in mind. These converters are manufactured using high-quality materials that include industrial Torrington-type encased needle bearings, customized turbine hubs and impeller fins to maintain strength and durability and high-flow vents and channels for better cooling. JEGS converters are not designed for nitrous, turbo, blower, or big block applications.
What bolts are needed for the 555-60411 converter for 700R4 trans?
Does this Converter come with new bolts?
Increasing horsepower and torque is great, but without the right torque converter, you won't be getting far. A new JEGS torque converter is a great way to make sure your car or truck can handle the extra power. Manufactured from high-quality materials using the latest technology, the JEGS TH350 is a must-have for anyone looking to take their performance to the next level.
What Are The Top JEGS Torque Converters Products
One of the most popular torque converters currently for sale by JEGS is the GM TH350/400 stall converter. With a 2200 to 2300 stall speed, this converter is perfect for street rods and muscle cars alike.
How Much Do JEGS Torque Converters Cost
At just over $275, you can get a great quality torque converter without breaking the bank. Increase the budget to $500 and you get a complete converter kit that includes a new flex plate and Quickshift automatic transmission fluid.
How To Use JEGS Torque Converters
Replacing the torque converter in your car or truck is a pretty straightforward process, but there certain steps that need to be followed to ensure proper installation. If unsure, contact JEGS customer service for specific instructions.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.