ROTOR RR BRK
Product Discontinued
ACDELCOPART NUMBER: 065-18A82039

ROTOR RR BRK

Currently Unavailable

This product is no longer available. Please call customer service for assistance at 1-800-345-4545.

    Part TypeBrake Rotor
    BrandACDELCO
    Weight15.8
    Center Hole Diameter70.85
    Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
    Directional Or Non-Directional Brake SurfaceNon-Directional
    Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
    Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
    Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
    Disc FinishCoated
    Stud/Lug Hole Quantity6
    Product DescriptionACDelco Gold (Professional) Fully Coated Disc Brake Rotors are the high quality alternative to Original Equipment (OE) parts. These rotors are mounted to the wheel hub where the calipers can press the brake pads against the brake surface to help slow the vehicle. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. &#9888;<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov
    Mounting Bolt Hole Quantity6
    Bolt Circle Diameter (Mm)120
    ConstructionComposite
    Width (In)2.8
    Mounting Bolt Hole Circle Diameter119.9
    Lug Quantity6
    Length (In)13.5
    Abs Tone Ring IncludedNo
    Surface TypeSmooth
    Bolt Circle Diameter (In)4.724
    Outside Diameter324.3
    Part CategoryReplacement Parts
    Overall Height3.15
    Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
    Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
    Programming RequiredNo
    Discard Thickness16
    Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
    Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
    Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
    Signs Of Wear &#38;#38; Troubleshooting - Section 1 - Bullet 1Vehicle pulls to the left or right when brakes are applied.
    Faq - Answer 1Yes, ACDelco also offers GM OE brake rotor and Advantage brake rotors.
    Features &#38;#38; Benefits - Bullet 6Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
    Inside Diameter9.449
    Features &#38;#38; Benefits - Bullet 2Coated rotors will remain cleaner longer than non-coated
    Features &#38;#38; Benefits - Bullet 3Protective micron-thin layer helps to inhibit environmental corrosion better than non-coated roated rotors; proved in up to 200 hours of industry-standard salt-spray testing
    Features &#38;#38; Benefits - Bullet 4Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
    Features &#38;#38; Benefits - Bullet 5Premium aftermarket replacement part
    Height (Mm)80
    Features &#38;#38; Benefits - Bullet 1COOL SHIELD coating - entire rotor surface including edges and vanes have baked-on zinc coating for durability and long lasting protection compared to uncoated
    Mounting Bolt Hole Diameter16
    Solid Or Vented Type RotorVented
    Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
    MaterialCast Iron
    Height (In)3.15
    Signs Of Wear &#38;#38; Troubleshooting - Section 1 - Bullet 2Visible ridges or deep grooves on the rotor surface.
    Rust Resistant CoatingYes
    SlottedNo
    Conventional Or Drum-In-Hat Type RotorConventional
    Part FitmentDirect Fit
    Nominal Thickness18
    Faq - Question 1Does ACDelco offer other grades of brake rotors?
    Vendor Part Number18A82039
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning
    Your Cart

    Your shopping cart is empty!