![SPE3881800 Elite Series Dart LS Next Cast Iron 388 ci. Short Block [1800 HP Rated]](https://www.jegs.com/images/mini_750/0/059/059-spe3881800.jpg)
ATK ENGINESPART NUMBER: 059-SPE3881800
SPE3881800 Elite Series Dart LS Next Cast Iron 388 ci. Short Block [1800 HP Rated]
$9,59020
Truck Freight
388 ci.
Elite Series Elite Series Short Block388 ci. Displacement 1800 HP Rating Dart LS Next Cast Iron Block (4.125 in. Bore) Billet Steel Crank (3.622 in. Stroke) Forged 4340 I-Beam Rods Forged 2618 Flat Top Pistons Pro Seal Rings
ATK Engines SPE3881800 Elite Series Short Block Features:
- Dart LS Next SHP Skirted Block features a full skirt design with a priority main oiling system, steel four bolt main caps and accepts a 4 or 6 bolt cylinder head
- Dart BILLET Crankshaft can handle over 2000 HP and outfitted with Center Counter Weights that adds material and strength to the center of the crank that counters the jump rope effect under high RPM and increased power
- Manley Pro Series I Beam Rods are fully-machined billet and have a heavier beam for forced induction applications
- JE Ultra Series Pistons include a thermal barrier crown coating, lateral gas ports, thick-wall wrist pins and a new forging technology for Massive Power and Boost right out of the box
- JE Pro Steel Rings maximize horsepower through precision sealing of combustion pressure. This ring pack will have a carbon steel top ring for high boost applications
- Calico Coated Bearings have a dry film lubricant to reduce friction and abrasive wear, provide intermittent dry lubrication and are not affected by dust or dirt
- Suitable for a Single or Twin Turbo application
ATK Engines SPE3881800 Elite Series Short Block Specs:
- Compression Ratios with .051 in. Gasket:
- 66 cc= 10.65:1 / 68 cc= 10.4:1 / 70 cc= 10.2:1
- Bore: 4.125 in.
- Stroke: 3.622 in.
- Displacement: 388 ci.
- Crankshaft: Dart Billet w/58 tooth reluctor wheel
- Rods: Manley Pro Series I Beams 4340 Forged 6.125 in. w/ARP 2000 Bolts
- Pistons: JE Ultra Flat Top 2618 Forged with Thermal Coating, Lateral Gas Ports, .200 in. Pin
- Rings: JE Pro Seal with Carbon Steel Top Ring
- Camshaft Bearings: Installed & Positioned to OEM Position
- Freeze Plugs: Installed with Sealant
- Oil Galley Plugs: Installed with Sealant
ATK Engines SPE3881800 Recommended Components (Each Sold Separately):
- Balancer Internally balanced
- Flexplate Internally balanced
- Head Gasket .051 in. Compressed Thickness
- Melling Oil Pump 10296 with red spring
- 20W50 NON-SYNTHETIC Oil for first 3000 miles
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Part TypeShort Block
BrandATK ENGINES
Package Height36.0
Package Width36.0
Package Length36.0
Weight445.0 PG
Part CategoryPerformance Parts
Crankshaft MaterialBillet
Cam Bearings IncludedYes
AssembledYes
Connecting Rod Beam StyleI-beam
Engine Assembly StyleShort Block
Part FitmentUniversal Fit
Actual Engine Cid388
Engine Stroke3.622 in (91.999 mm)
Bore4.125 in (104.8 mm)
Vendor Part NumberSPE3881800
Package Qty1
Package TypeEA
No Questions
No Reviews
Items You Need
Some parts are not legal for use in California or other states with similar laws / regulations
![Cylinder Head Kit for GM LS3 Engines [w/Head Bolts]](https://www.jegs.com/images/mini_200/500/555/555-514050k.jpg)
![Cylinder Head for GM LS1, LS2, LS6 Engines [Cathedral Port]](https://www.jegs.com/images/mini_200/500/555/555-514055.jpg)

![Cylinder Head Kit for GM LS3 Engines [w/Head Studs]](https://www.jegs.com/images/mini_200/500/555/555-514050k2.jpg)
![Pro1 LS 12° As-Cast Rectangle Port Aluminum Cylinder Head [Bare]](https://www.jegs.com/images/mini_200/300/301/301-11060000j.jpg)

![Hydraulic Roller Camshaft Assembly Kit for 1997-2015 GM LS GEN III/IV [283/286 Duration, 585/585 Lift, 112 LSA]](https://www.jegs.com/images/mini_200/500/555/555-200582k.jpg)
![Black Finned Aluminum Valve Covers for GM LS Engines [2-piece Hidden Coil Design]](https://www.jegs.com/images/mini_200/500/555/555-501070.jpg)

![Hydraulic Roller Camshaft for 1997-2015 GM LS Gen III/IV w/3-Bolt Timing Sprocket [Sloppy Stage 2]](https://www.jegs.com/images/mini_200/500/555/555-200582.jpg)








![High-Strength Harmonic Balancer Bolt for GM LS1/LS2/LS6/L92 & GM GEN V LT1, LT4 Engines [12-Point Head]](https://www.jegs.com/images/mini_200/500/555/555-82806.jpg)
![Harmonic Balancer Bolt for GM LS1/LS2/LS6/L92 Engines [6-Point Hex Head]](https://www.jegs.com/images/mini_200/500/555/555-82805.jpg)

