$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

Made in USA
Pro Front Disc Brake Kit for 1964-1974 Buick, Chevrolet and Other Models [Silver 6P 6-Piston Calipers]
InfoVehicle Info Needed
BAER BRAKEPART NUMBER: 136-4301683S

Pro Front Disc Brake Kit for 1964-1974 Buick, Chevrolet and Other Models [Silver 6P 6-Piston Calipers]

$1,70895$1899.95You Save$191.00
ShippingShips Tomorrow
Lowest PriceLowest Price Guarantee

Pro Front Disc Brake Kit
  • 1964-1974 Buick, Chevrolet and Other Models
  • See Fitment Tab for All Applications
  • 13 in. x 1.100 in. 1-Piece Integral Hub Rotors
  • Slotted, Drilled and Zinc Plated
  • Silver 6P 6-Piston Calipers
  • Sold as a Kit

    Factory front brakes were sized for the tires and speeds of their day, and they fade quickly when pushed hard on the street or track. This Pro kit replaces them with 13 in. 1-piece integral hub rotors and 6-piston calipers, giving the front end the clamping force and heat capacity to stop repeatedly without fade.

    Baer 4301683S Pro Front Disc Brake Kit Features:

    • Fits 1964-1972 Buick Skylark.
    • Fits 1964-1969 Buick Special.
    • Fits 1964-1972 Buick Sportwagon.
    • Fits 1964-1968 Chevrolet Chevy II.
    • Fits 1964-1972 Chevrolet Chevelle.
    • Fits 1964-1972 Chevrolet El Camino.
    • Fits 1967-1969 Chevrolet Camaro.
    • Fits 1969-1974 Chevrolet Nova.
    • Fits 1970-1972 Chevrolet Monte Carlo.
    • Fits 1964-1971 Oldsmobile 442.
    • Fits 1964-1972 Oldsmobile F85.
    • Fits 1964-1972 Oldsmobile Cutlass.
    • Fits 1964-1972 Pontiac GTO.
    • Fits 1964-1972 Pontiac LeMans.
    • Fits 1964-1970 Pontiac Tempest.
    • Fits 1967-1969 Pontiac Firebird.
    • Fits 1971-1974 Pontiac Ventura.
    • Powder Coated Finish.
    • Stainless Steel Pistons, Abutments and Noise Suppression Clips.
    • Staggered Pistons to Minimize Uneven Pad Wear.
    • Dual Seals, Dust/Weather and Pressure.
    • 1-Piece Slot, Drilled, Zinc-Plated Integral Hub Rotor.
    • 13 in. x 1.100 in. 1-Piece Integral Hub rotors with a slotted, drilled and zinc plated finish.
    • Silver caliper finish.
    • 6P caliper, 6 pistons.
    • Uses D0731 pads.
    • Wheel bolt pattern 5x4.75.
    • Wheel studs 1/2-20 x 1.875 inch.
    • Stainless Braided Brake Hoses.
    • Widens track .200 in. a side on stock front drum brake cars.
    • For vehicles with OE Spindles or DSE, Heidt's, Fatman, Ridetech, L&H or Speedway Motors G-Comp Drop Spindles.
    • Requires a minimum 17 in. wheel diameter; verify wheel clearance with Baer template Q085H.
    • Sold as a kit.
  • Part TypeDisc Brake Kit
    BrandBAER BRAKE
    Package Height15.5
    Package Width15.5
    Package Length15.5
    Weight73.0 PG
    Wheel Lug/Bolt Pattern5x4.75
    Rotor Type1-Piece Integral Hub
    Brake Hose Dot ApprovedYes
    ColorSilver
    Disc Brake Rotor (Front) ConstructionVented
    Caliper6P
    QuantitySold as a Kit
    Disc Brake Pad Fmsi NumberD0731
    Rotor Thickness1.100 in
    AxleFront
    Wheel Stud Size1/2-20 x 1.875 inch
    Disc Brake Caliper (Front) Piston Quantity6
    Spindles IncludedNo
    Disc Brake Rotor (Front) Outside Diameter13 in
    Wheel TemplateQ085H
    Lug Count5 Lug
    Spindle TypeGM AFX (also fits DSE, Heidt's, Fatman, Ridetech, L&H or Speedway Motors G-Comp 2" drop spindles)
    Minimum Wheel Diameter17 in
    Disc Brake Caliper (Front) TypeFixed
    Surface TypeSlotted, Drilled & Zinc Plated
    Hose MaterialSteel Braided
    Vendor Part Number4301683S
    Package Qty1
    Package TypeEA
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning