Xtreme Marine Hydraulic Flat Tappet Camshaft Lift .483"/.483" Duration 280/288 RPM Range 2600-5700

Vehicle Info Needed

COMP CAMSPART NUMBER: 249-12-324-4

Xtreme Marine Hydraulic Flat Tappet Camshaft Lift .483"/.483" Duration 280/288 RPM Range 2600-5700

Name: Xtreme Marine Hydraulic Flat Tappet Camshaft Lift .483"/.483" Duration 280/288 RPM Range 2600-5700
Brand: COMP CAMS
SKU: 249-12-324-4
Price: 309.95 USD
Availability: InStock

^$309⁹⁵

Ships Today

Lowest Price Guarantee

Items You Need

JEGS

Engine Assembly Lube [4 oz. Bottle]

Part Number : 555-28000

^$5⁹⁹$6.99

You Save$1.00

JEGS

Break-In/Engine Oil Supplement [12 oz. Bottle]

Part Number : 555-28060

^$10⁰⁹$11.99

You Save$1.90

JEGS

Valve Spring Compressor [Stud Mount]

Part Number : 555-80518

^$9¹⁹$9.99

You Save$0.80

JEGS

Valve Spring Compressor [Stud Mount]

Part Number : 555-80521

^$52⁹⁹$58.99

You Save$6.00

Chevrolet 262-400 c.i. 8 CYL. 1958-1998 b>

Xtreme Marine Hydraulic Flat Tappet Camshaft
Lift .483"/.483"
Duration 280/288
RPM Range 2600-5700

Hydraulic-High performance in 350- 400 engines, strong off shore cam.
265, 283, 307, 302, 305, 327, 350, 383, 400, 427, L46, L48, L65, LM1, LT-1, L82, L81, LS9, L83, L98, L05, LG3, LG4, LT1, LT4, Camaro, Corvette, Chevelle, Stingray, Silverado, C10, Firebird, Chevrolet, Chevy, Small Block Chevy, Caprice, Malibu, Impala, Nova, 355, GEN1, Monte Carlo, S10

High performance in 350-400 engines, strong off-shore cam.

Emissions Note:

This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.

CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART

Part TypeCamshaft
BrandCOMP CAMS
Package Height2.75
Package Width2.87
Package Length24.5
Weight8.0 PG
Part CategoryPerformance Parts
Exh. Duration @ .050 In. (Deg)237
Cam StyleHydraulic flat tappet
Grind Number280AH
Exh. Duration Advertised (Deg)288-9
Engine Make/SizeChevy Small Block (262-400)
Intake Valve Lift With Factory Rocker Arm Ratio (I0.483
Int. Duration @ .050 In. (Deg)232
Basic Operating Rpm Range2,600-5,800
Intake Valve Lift0.483 in (12.268 mm)
Computer-Controlled CompatibleNo
Int. Duration Advertised (Deg)280-9
Lobe Separation (Deg)110
Rpm Range2600-5700
Advertised Duration280 int./288 exh.
Exhaust Valve Lift With Factory Rocker Arm Ratio (0.483
UsageOEM
Valve Lift With Factory Rocker Arm Ratio0.483 int./0.483 exh.
QuantitySold individually
Exhaust Valve Lift0.483 in (12.268 mm)
Advertised Intake Duration280
Intake Duration At 050 Inch Lift232
Exhaust Duration At 050 Inch Lift237
Advertised Exhaust Duration288
Lifter TypeHydraulic Flat Tappet
Part FitmentSemi Universal
Duration At 050 Inch Lift232 int./237 exh.
Valve Springs RequiredYes
Vendor Part Number12-324-4
Package Qty1
Package TypeEA

ITEM YOU MAY ALSO CONSIDER

COMP CAMS
Xtreme Energy 268H Hydraulic Flat Tappet Camshaft Only Lift: .477" /.480" Duration: 268°/280° RPM Range: 1600-5800
Xtreme Energy 268H Hydraulic Flat Tappet Camshaft Only Lift: .477" /.480" Duration: 268°/280° RPM Range: 1600-5800
Part Number : 249-12-242-2
^$293⁹⁵

COMP CAMS
'Xtreme 4x4' Hydraulic Flat Tappet Camshaft
'Xtreme 4x4' Hydraulic Flat Tappet Camshaft
Part Number : 249-12-243-3
^$297⁹⁵

HOWARDS CAMS
1955 - 1998 CHEVROLET 262
1955 - 1998 CHEVROLET 262
Part Number : 466-112141-12
^$226⁹⁹

Some parts are not legal for use in California or other states with similar laws / regulations
⚠️ Warning
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.