Hawks Motorsports HM8292BBUKIT-GEN6SS Features:

1982–1992 Camaro & Firebird Big Brake Upgrade Kit – Gen 6 Camaro SS 4-Piston Calipers with C7 Z51 Rotors Modernize the stopping power of your 1982–1992 Camaro or Firebird with this Hawks Motorsports Big Brake Upgrade Kit using Gen 6 Camaro SS 4-piston Brembo calipers. Designed for performance, reliability, and ease of installation, this system is built around our proprietary spindle assembly and includes everything needed to bolt on one of GM’s best-performing factory brake setups. To retain compatibility with third-gen specs, we’ve paired the Gen 6 SS calipers with one-piece slotted C7 Z51 rotors. These rotors match the correct 70.6mm center bore, 5x120.65 bolt pattern, and M12 wheel studs used on third-gen F-bodies — eliminating the need for custom hubs or adapters. For those who prefer to run factory Gen 6 SS rotors, that option is still available, but will require either Gen 6 wheel bearings (with 67.5mm center bore and 5x120 bolt pattern) or modification of the rotor bore to fit Corvette hubs. This kit delivers exceptional braking feel, reduced fade, and high-end looks — perfect for performance street builds and pro-touring applications. Please note: These spindles do lower the front ride height .900". Key Features: Uses Gen 6 Camaro SS 4-piston Brembo calipers Paired with 13.6" slotted C7 Z51 rotors for bolt-on third-gen compatibility One-piece rotor design improves durability and simplifies installation Includes stainless braided brake hoses and all necessary mounting brackets Designed for use with C6/C7 Corvette hubs Kit Includes: Hawks Motorsports front spindle assemblies Gen 6 Camaro SS 4-piston calipers (new or customer-supplied) Slotted 13.6" C7 Z51 front rotors (new or customer-supplied) New brake pads (new or customer-supplied) Stainless braided front brake lines (new or customer-supplied) Billet brake caliper brackets Fitment: 1982–1992 Chevrolet Camaro 1982–1992 Pontiac Firebird Direct fit with C6/C7 Corvette hubs (recommended) Compatible with OEM or aftermarket lower control arms Requires minimum 18" wheels for clearance Hawks Recommends: Caliper - GM 1722782 & GM 1722783 Caliper Hardware - 11762080 Rotor - 2X GM 1771196 Pads - 17D1405M Wheel Bearing - 2X GM C7 Front 85144278 Notes: This kit is optimized for use with C7 Z51 rotors to retain third-gen bolt pattern and hub specs If using OEM Gen 6 Camaro SS rotors: You must run Gen 6 wheel bearings (67.5mm center bore, 5x120mm, M14 studs) Or machine the rotor center bore to 70.6mm to retain Corvette hubs and 3rd gen wheel compatibility Hawks guarantees fitment when using the supplied C7 Z51 rotors and Corvette hubs INSTALLATION INSTRUCTIONS Bring modern Brembo braking performance to your third-gen Camaro or Firebird with our Gen 6 SS-based big brake upgrade kit. With the C7 Z51 rotor substitution, this system bolts on with no surprises and delivers serious stopping power. Order now and drive with confidence.