Breakdown of Included Items

Compatible Transmissions Include:

• 727 – With small truck starter
• 46RFE – With small truck starter
• 545RFE – Left or Right side starter

Compatible Starters Include:

• Nag1 – Left or Right side starter
• 8HP70 – Left or Right side starter
• TR6060 – Right side starter

Features:

• Compatible with all 5.7L, 6.1L, 6.2L, 6.4L Gen III Hemi Engines
• A variable valve timing (VVT) front cover is needed for models with a low-mount A/C compressor (sold separately) 
• O2 sensor bungs in each collector
• Works with factory power steering box
• Well-suited for torsion bar suspension applications
• Lightweight 18-gauge 304 stainless steel with mandrel bends
• 1.875 in (1 7/8 in.) primary tubes
• Designed for maximum clearance
• Hand-welded construction
• Includes hardware

Emissions:

• Not legal for sale or use in California

This product is engineered to facilitate the installation of a later model, emissions friendly engine into a vintage / classic vehicle. Federal guidelines indicate that an engine swap is allowable if one or more of the following conditions apply:

• If there is a reasonable basis for knowing that emissions are not adversely affected as described in EPA Memo 1A
• The resulting vehicle is identical (with regard to all emissions-related parts, engine design parameters, and engine calibrations) to a certified configuration of the same or newer model year as the vehicle chassis
• The vehicle is an uncontrolled vehicle - Vehicles that were manufactured before emission control regulations took effect are called uncontrolled vehicles. Aftermarket parts regulations and anti-tampering laws do not apply to these vehicles
• An EO legal engine swap kit is utilized (such as a GM EROD)
• The vehicle is being used for Competition Use Only - Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street
• Note: Consumers are responsible for complying with laws prohibiting tampering, and for ensuring that modified vehicles are operated in a manner that complies with applicable laws.

Notes:

• 2003-2008 5.7L rectangular port require 720-7594, 293-53013943AA, or 293-53013944AA header gasket (sold separately)
• 2003-2008 6.1L, and 2009-Up 5.7L Hemi Engines use 293-5038098AA Header Gaskets (sold separately)
• Requires use of 520-BHS531 engine swap brackets (sold separately)
• For use with 520-BHS532 transmission crossmember and an adapter plate for the corresponding transmission (sold separately)