$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

GM LS Turbo Headers [1 3/4 in. Diameter, 3 in. Collector]
InfoVehicle Info Needed
JEGSPART NUMBER: 555-300160

GM LS Turbo Headers [1 3/4 in. Diameter, 3 in. Collector]

$24899$299.99You Save$51.00
More than 10 available
ShippingShips Today
Lowest PriceLowest Price Guarantee

Items You Need

Heavy-Duty Nitrile Gloves [7 mils Thick, Large]

JEGS

Heavy-Duty Nitrile Gloves [7 mils Thick, Large]

Part Number : 555-1124
$1799$19.99
You Save$2.00
Copper RTV Temperature Resistant up to 700 degrees F

JEGS

Copper RTV Temperature Resistant up to 700 degrees F

Part Number : 555-28038
$699$7.99
You Save$1.00
3.0" ID Exhaust Turndowns Pair

JEGS

3.0" ID Exhaust Turndowns Pair

Part Number : 555-30536
$5699$62.99
You Save$6.00
M8 x 1.25 Header Bolt Kit, Hex Head, 30mm Long for Ford Modular and Chevy LS Engines

JEGS

M8 x 1.25 Header Bolt Kit, Hex Head, 30mm Long for Ford Modular and Chevy LS Engines

Part Number : 555-30713
$1018$11.99
You Save$1.81

Turbo Headers
  • GM LS 4.8, 5.3, 6.0L V8
  • 1 3/4 in. Tube Diameter
  • 3 in. Collector
  • Up Swept, Forward Facing
  • 4 to 1 Configuration
  • 16-Gauge 409 Stainless Steel
  • Includes:
  • (2) Flanges
  • (2) V-Band Clamps
  • (2) Gaskets

    JEGS 555-300160 GM LS Turbo Headers Features:

    • Excellent choice for both street and strip vehicles
    • Configured to fit tight to the block and add unrestricted flow to your exhaust system
    • Mandrel-bent stainless steel tubing and clean, quality welds add corrosion resistance and extra longevity
    • Ideal for engine swap applications, your camaro or mustang, or even custom street rods
    • Includes two flanges, two v-band clamps, and two gaskets

    Special Exhaust Headers Notes:

    • Due to variations in engine and vehicle configurations, installation of aftermarket headers may require minor modifications
    • Common adjustments include power-steering or A/C bracket relocation, dipstick tube modification, or clearance for steering shaft and clutch linkage
    • Inspect for worn or collapsed motor mounts, and verify clearance for spark plugs, wires, brake lines, and transmission or fuel lines
    • Always test-fit headers before painting or coating to ensure proper alignment and clearance
    • Re-torque after initial heat cycles
  • Unrestricted Turbo Performance

    An excellent choice for both street and strip vehicles; JEGS GM LS Turbo Headers are ideal for engine swap applications, your Camaro or Mustang, or even custom street rods. Available in either 1 3/4 in. or 1 7/8 in. tube diameter, these universal Turbo Headers are configured to fit tight to the block and add unrestricted flow to your exhaust system. Mandrel-bent stainless steel tubing and clean, quality welds add corrosion resistance and extra longevity to each pair of LS Headers. For a leak free seal, each set of 4-to-1 LS Headers comes complete with 3 in. v-band outlets, 7/16 in. thick flanges, gaskets, and clamps.

    Show More

    Features:

    • Especially for the LS Performance Market
    • 16-gauge 409 Stainless Steel offers Corrosion Resistance
    • Constructed with Mandrel-Bent Tubing & Clean, Quality Welds
    • Forward Facing Configuration for Both Street & Strip Vehicles
    • 1 3/4 in. & 1 7/8 in. Tube Diameters Available
    • Includes Flanges, Gaskets, & Clamps
    Part TypeHeader
    Product LineJEGS GM LS Turbo Headers
    BrandJEGS
    Package Height5.5
    Package Width17.6
    Package Length24.6
    Weight20.545 PG
    Part CategoryPerformance Parts
    Header FinishNatural
    Tube DirectionUp Swept
    QuantitySold as a pair
    Bolts/Studs IncludedNo
    Cylinder Head Port ShapeRound
    Transmission Mount IncludedNo
    Header MaterialStainless steel
    Gaskets IncludedYes
    Weld-UpNo
    Flange StyleStandard
    TunedNo
    Collector Diameter3 in (76.2 mm)
    Motor Mounts IncludedNo
    Part FitmentSemi Universal
    Reducers IncludedNo
    Primary Tube Gauge16-gauge
    Cross Over Pipe IncludedNo
    Catalytic Converter(S) IncludedNo
    Primary Tube Diameter1.75 in (44.5 mm)
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    ITEM YOU MAY ALSO CONSIDER

    LS Turbo Headers GM 4.8/5.3/6.0L V8

    FLOWTECH

    LS Turbo Headers GM 4.8/5.3/6.0L V8

    Part Number : 387-11535
    $27995$311.95
    You Save$32.00
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning