GM LS Shorty Conversion Headers for 1967-1969 Chevy Camaro and 1964-1972 Chevy Chevelle [304 Stainless Steel]
InfoVehicle Info Needed
JEGSPART NUMBER: 555-300169

GM LS Shorty Conversion Headers for 1967-1969 Chevy Camaro and 1964-1972 Chevy Chevelle [304 Stainless Steel]

$28499$313.99You Save$29.00
More than 10 available
ShippingShips Today
Lowest PriceLowest Price Guarantee

Items You Need

Street Rod/Muscle Car Exhaust Kit 2 1/2 in.

JEGS

Street Rod/Muscle Car Exhaust Kit 2 1/2 in.

Part Number : 555-30521
$41999$461.99
You Save$42.00
Stainless Steel Exhaust Tubing 2.500 in. OD x 4 ft. L

JEGS

Stainless Steel Exhaust Tubing 2.500 in. OD x 4 ft. L

Part Number : 555-30910
$3499$38.99
You Save$4.00
Stainless Steel HD U-Clamp for 2-1/2" OD Pipe

JEGS

Stainless Steel HD U-Clamp for 2-1/2" OD Pipe

Part Number : 555-30722
$999$10.99
You Save$1.00
Stainless Steel Exhaust Hanger Bolt-on Style

JEGS

Stainless Steel Exhaust Hanger Bolt-on Style

Part Number : 555-309001
$2999$32.99
You Save$3.00

LS
GM LS Shorty Conversion Headers
  • 1967-1969 Chevy Camaro
  • 1964-1972 Chevy Chevelle
  • LS1/LS2/LS3/LS6/LS7
  • 1.625 in. Primary Tubes
  • 2.500 in. Collector
  • 304 Stainless Steel
  • Natural Finish

    JEGS 555-300169 Stainless Steel Shorty Headers for GM LS1/LS2/LS3/LS6/LS7 engines is the perfect exhaust choice when swapping an LS engine into a 1967-1969 Chevrolet Camaro or 1964-1972 Chevrolet Chevelle. These quality headers have mandrel-bent primary tubes and 3/8 in. thick laser-cut flanges that will provide you with the best fitment possible.

    JEGS 555-300169 Includes:

    • (1) Pair of LS 304 Stainless Steel Headers
    • (2) LS Header Flange Gaskets
    • (12) Header Flange Bolts: 8 mm x 1.25 x 30 mm L 304 Stainless Steel with 3/8 Hex Head
    • (2) Collectors: 2.500 in., 2.500 in. O.D. x 4 3/4 in. L 304 Stainless Steel with Oxygen Sensor Bung and Three Bolt Flange
    • (2) Collector Gaskets: 2.500 in. I.D. and 3-bolt Pattern
    • (6) Collector Bolts: 3/8 in.24 x 1 L Stainless Steel with 9/16 in. Hex Head
    • (6) Collector Bolt Nuts: 3/8 in.-24 Stainless Steel with 9/16 Hex head

    Special Exhaust Headers Notes:

    • Due to variations in engine and vehicle configurations, installation of aftermarket headers may require minor modifications
    • Common adjustments include power-steering or A/C bracket relocation, dipstick tube modification, or clearance for steering shaft and clutch linkage
    • Inspect for worn or collapsed motor mounts, and verify clearance for spark plugs, wires, brake lines, and transmission or fuel lines
    • Always test-fit headers before painting or coating to ensure proper alignment and clearance
    • Re-torque after initial heat cycles

    FAQ

    Do Shorty headers really make a difference?

    • Yes, Shorty headers improve exhaust flow, providing a noticeable performance boost and better throttle response over stock manifolds.

    Will Shorty headers increase horsepower?

    • Shorty headers can contribute to increased horsepower by enhancing exhaust scavenging and reducing back pressure.

    Will Shorty headers bolt up to the stock exhaust?

    • Depending on the application in some cases shorty headers will bolt up to the stock exhaust system, facilitating an easier installation process. Check product info to assure a direct fit.

    Emissions Note:

    This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.

    CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART

    • Performance Headers at Budget Prices

      JEGS Tubular Headers offer an immediate increase in performance by eliminating backpressure, improving exhaust flow, and building more horsepower. The consistent tubing diameter contributes to the smooth airflow and higher exhaust velocity.

    Part TypeHeader
    Product LineJEGS Tubular Headers
    BrandJEGS
    Package Height10.8
    Package Width13.3
    Package Length21.8
    Weight22.0 PG
    Part CategoryPerformance Parts
    Coating/FinishNatural
    Oxygen Sensor Bung IncludedYes
    Header Flange Thickness0.375 in (9.525 mm)
    Header FinishNatural
    Mandrel-BentYes
    QuantitySold as a pair
    Engine Make/SizeLS1/LS2/LS3/LS6/LS7
    Header Material409 Stainless Steel
    Collector Attachment3-bolt flange
    Flange StyleStandard
    TunedNo
    Collector Diameter2.5 in (63.5 mm)
    Part FitmentSemi Universal
    Catalytic Converter IncludedNo
    Reducers IncludedYes
    Primary Tube Gauge16-gauge
    Header StyleShorty
    Primary Tube Diameter1.625 in (41.3 mm)
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews

    REPLACEMENT PARTS

    Exhaust Header Gaskets for Chevy LS1/LS2/LS3/LS6 Round Port Port Size: 2.00"

    JEGS

    Exhaust Header Gaskets for Chevy LS1/LS2/LS3/LS6 Round Port Port Size: 2.00"

    Part Number : 555-210851
    $1799$20.99
    You Save$3.00
    M8 x 1.25 Header Bolt Kit, Hex Head, 30mm Long for Ford Modular and Chevy LS Engines

    JEGS

    M8 x 1.25 Header Bolt Kit, Hex Head, 30mm Long for Ford Modular and Chevy LS Engines

    Part Number : 555-30713
    $1018$11.99
    You Save$1.81
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning