JEGS 555-631916 Standard Front Disc Brake Conversion Kit

JEGS 631916 Front Disc Brake Conversion Kit will provide the latest braking technology for 1962-1972 Dodge Dart models, 1967-1969 Plymouth Barracuda, 1970-1972 Plymouth Duster models & 1960-1972 Plymouth Valiant models. This kit is easy to install and includes all the necessary components to convert from drum to disc brakes.

JEGS 555-631916 Standard Front Disc Brake Conversion Kit Includes:

• (2) 11 in. Diameter Standard Rotors with Small 5 x 4 in. Bolt Pattern
• (1 Pair) Large Single Piston Kelsey Hayes Slider Type Disc Brake Calipers, Raw (Natural Cast Iron) Finish with Brake Pads and Mounting Hardware
• (2) Rubber Brake Hoses with Banjo Bolts and Copper Washers
• (2) Inner Wheel Bearing Sets
• (2) Outer Wheel Bearing Sets
• (2) Wheel Bearing Grease seals
• (2) Dust Caps
• (2) Spindle Nuts and Washers
• (2) Cotter Pins
• (1) Package of Caliper Bracket Mounting Bolts and Lock Nuts
• (1) Spindle, Left/Driver Side (Stock Height)
• (1) Spindle, Right/Passenger Side (Stock Height)
• (1) Pair of Caliper Brackets
• (1 Pair) Lower Steering Arm Assemblies with Ball Joints
• (1 Pair) Upper Ball Joint Adapters

JEGS 555-631916 Standard Front Disc Brake Conversion Kit Notes:

• This Kit Fits the Small 5 x 4 in. Bolt Pattern Only
• Fits the Original 14 in. Diameter Wheels that were mounted on Rear Axles with 10 in Diameter or Larger Brake Drums
• Will Not Fit These Wheels: Factory Steely Wheels, Cragar SST Steel Wheels, Year One Rally Wheels, or any 14 in. Diameter Wheel that was Originally used on Rear Axles with Smaller Than 10 in. Diameter Brake Drums)
• By installing this kit you do not have to replace the upper control arms like other kits on the market. The kit includes adapters to make the smaller upper ball joints fit the spindles included