JEGS 555-631932 Premium Front and Rear Disc Brake Conversion Kit

JEGS 631932 Front and Rear Disc Brake Conversion Kit will provide the latest braking technology for the 1962-1976 Dodge Dart, 1962-1974 Plymouth Valiant, 1970-1976 Plymouth Duster & 1971-1976 Plymouth Scamp. This kit is easy to install and includes all the necessary components to convert from drum to disc brakes.

JEGS 555-631932 Premium Front and Rear Disc Brake Conversion Kit Includes:

• (2) Front, 11 in. Diameter Drilled and Slotted Rotors with Large 5 x 4.50 in. Bolt Pattern
• (2) Rear, 11 in. Diameter Drilled & Slotted Rotors with Multi-Drilled 5 x 4 & 5 x 4.50 in. Bolt Patterns
• (1 Pair) Front, Large Single Piston Kelsey Hayes Slider Type Disc Brake Calipers, Red Powder Coat Finish with MKD84 Brake Pads
• (1 Pair) Rear, Large Single Piston Emergency Brake Calipers, Red Powder Coat Finish with MKD154 Brake Pads
• (4) Braided Stainless Steel Brake Hoses with Banjo Bolts and Copper Washers
• (2) Front Inner Wheel Bearing Sets
• (2) Front Outer Wheel Bearing Sets
• (2) Front Wheel Bearing Grease seals
• (2) Front Dust Caps
• (2) Front Spindle Nuts and Washers
• (2) Front Cotter Pins
• (1) Front, Package of Caliper Bracket Mounting Bolts and Lock Nuts
• (1) Front Spindle, Left/Driver Side (Stock Height)
• (1) Front Spindle, Right/Passenger Side (Stock Height)
• (1 Pair) Front Caliper Brackets
• (1 Pair) Rear Caliper Brackets
• (1 Pair) Front Lower Steering Arm Assemblies with Ball Joints
• (1 Pair) Front Upper Ball Joint Adapters

JEGS 555-631932 Premium Front and Rear Disc Brake Conversion Kit Notes:

• This Kit Fits the Large 5 x 4.50 in. Bolt Pattern Only
• The Rear Rotors Will Not Fit 14 in. Diameter Wheels
• The Front Rotors Will Fit the Factory's Original 14 in. Diameter Wheels
• Front Rotors Will Not Fit These Wheels: Factory Steely Wheels, Cragar SST Steel Wheels, Year One Rally Wheels, or any 14 in. Diameter Wheel that was Originally used on Rear Axles with Smaller Than 10 in. Diameter Brake Drums)
• By installing this kit you do not have to replace the upper control arms like other kits on the market. The kit includes adapters to make the smaller upper ball joints fit the spindles that are  included