$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

New Item Badge
Ford 8.8 in. Rear Disc Brake Conversion Kit for Select 1980-1996 Ford F150, Bronco [Standard Kit Non E-Brake & Natural Calipers]
InfoVehicle Info Needed
JEGSPART NUMBER: 555-631976

Ford 8.8 in. Rear Disc Brake Conversion Kit for Select 1980-1996 Ford F150, Bronco [Standard Kit Non E-Brake & Natural Calipers]

$42599$468.99You Save$43.00
ShippingShips on 11/25/2026
Lowest PriceLowest Price Guarantee

Items You Need

1003793 DOT 3 Brake Fluid [12 oz.]

GLOCKNER OIL

1003793 DOT 3 Brake Fluid [12 oz.]

Part Number : 708-1003793
$699
Pneumatic Brake Bleeder Kit

JEGS

Pneumatic Brake Bleeder Kit

Part Number : 555-63208
$5699$81.99
You Save$25.00
3-piece SAE Flare Nut line Wrench Set

JEGS

3-piece SAE Flare Nut line Wrench Set

Part Number : 555-W350
$1499$16.99
You Save$2.00
Brake Caliper Hangers Pair

JEGS

Brake Caliper Hangers Pair

Part Number : 555-W80624
$799$8.99
You Save$1.00

Rear Disc Brake Conversion Kit
  • 1980-1996 Ford F-150
  • 1980-1996 Ford Bronco
  • Ford 8.8 in. Rear Axle
  • 12.00 in. Solid Vented Rotors
  • 5 x 5 1/2 in. Bolt Pattern
  • Natural Cast Iron Non E-Brake Calipers
  • Rubber Brake Hoses

    This JEGS Standard Rear Axle Disc Brake Conversion Kit without Parking Brake is an easy bolt-on solution for upgrading the Ford 8.8 in. rear end in select 1980-1996 Ford F-150 and 1980-1996 Ford Bronco trucks to rear disc brake performance. Rear discs shed heat more effectively than drums and resist fade through repeated stops, towing, and hard driving, and the kit mounts to the factory axle housing using the supplied brackets and hardware.

    JEGS 555-631976 Rear Axle Disc Brake Conversion Kit Includes:

    • (2) Standard rotors, 12.00 in. diameter, drilled for 5 x 5 1/2 in. bolt pattern
    • (1 Box) Left/Driver Side and Right/Passenger Side brake calipers with semi-metallic brake pads
    • (2) Caliper brackets, black powder coated
    • (2) Rubber brake hoses
    • (1 Bag) Hardware kit, including T-bolts

    JEGS 555-631976 Rear Axle Disc Brake Conversion Kit Features:

    • Fits select 1980-1996 Ford F-150
    • Fits select 1980-1996 Ford Bronco
    • Fits the Ford 8.8 in. rear axle housing, 3.410 in. x 1.68 in. flange
    • Rear wheel position
    • 12.00 in. solid surface vented rotors
    • 5 x 5 1/2 in. wheel bolt pattern
    • Single-piston cast iron calipers with a natural finish
    • Semi-metallic brake pads included
    • Compatible with manual or power assisted brake systems
    • Rubber brake hoses, mounting brackets, and hardware included
    • Bolt-on installation with no welding required

    JEGS 555-631976 Rear Axle Disc Brake Conversion Kit Notes:

    • This kit does not include a parking brake provision; the calipers are not emergency brake calipers
    • The installation of disc brakes will require the use of 15 in. wheels with a minimum 7 in. width. Any attempt to install disc brakes with a 14 in. wheel will be the customer's responsibility.
    • This kit requires a disc/disc proportioning valve; a proportioning valve is not included
    • JEGS recommends a large bore master cylinder when adding disc brakes; a master cylinder and brake booster are not included
    • Brake fluid and hard brake lines are not included
    • Professional installation is recommended, and the brake system must be bled before the vehicle is driven
    • Add Safety, Reliability and Performance to Your Vehicle with Rear Disc Brakes

      JEGS Ford 9 in. Rear Disc Conversion Kits combine the best features available to make your selection and installation easy. In addition to calipers with pads, rotors, brake hoses and mounting hardware, each disc brake kit includes all of the brackets and flanges for the Small Ford, Early Big Ford, and Late Big Ford housing ends. We offer standard (coil springs with both shocks behind rear axle) or staggered (leaf springs with one shock forward of and one shock behind the rear axle) conversion set-ups, with or without parking brakes. Our premium High-Performance Rear Brake Kits come complete with cross-drilled and slotted rotors, plus braided stainless steel hoses. See each item for specific details.

      Show More
    Part TypeBrake Conversion Kit
    Product LineJEGS Ford 8.8" & 9 in. Rear Disc Brake Conversion Kits
    BrandJEGS
    Package Height14.0
    Package Width15.5
    Package Length15.5
    Weight62.9 PG
    Part CategoryPerformance Parts
    Minimum Wheel Width7 in.
    Minimum Recommended Wheel Diameter15 in.
    RemanufacturedNo
    Friction Material NameSemi-metallic
    Brake Hoses IncludedYes
    Parking Brake ProvisionNo
    Rear Rotor Diameter12.00 in.
    Rear Caliper MaterialCast iron
    Master Cylinder IncludedNo
    Rear Rotor ConstructionVented
    Rear Rotor IncludedYes
    UniversalNo
    Differential Case Design TypeFord 8.8 in.
    PositionRear
    Brake Pads IncludedYes
    Rear Rotor StyleSolid surface
    Brake Booster IncludedNo
    Rear Caliper Piston QuantityOne
    Brake Rotor Bolt Pattern5 x 5.50 in.
    Disc Brake Kit TypeManual or power assist
    Axle Housing Flange StyleFord 8.8 (3.410 in. x 1.68 in.)
    Part FitmentDirect Fit
    Rear Caliper ColorNatural
    Proportioning Valve IncludedNo
    Rear Caliper IncludedYes
    Package Qty1
    Package TypeEA
    No Questions
    No Reviews
    Some parts are not legal for use in California or other states with similar laws / regulations
    p65 warning