12 Days of Christmas
1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

Hedman 69090

Standard Duty Uncoated Full Length Headers 1967-91 Chevy/GMC Truck, Blazer/Jimmy, Suburban, Van

Hedman 69090

500-69090

jegs shipping
FREE Shipping
Ships
Hedman 69090 Standard Duty Uncoated Full Length Headers 1967-91 Chevy/GMC Truck, Blazer/Jimmy, Suburban, Van $177.99
Standard Duty Uncoated Full Length Headers
  • 1967-91 Chevy/GMC Truck, Blazer/Jimmy, Suburban, Van
  • Small Block Chevy 283-400ci
  • Tube Size: 1-5/8"
  • Collector Size: 3"

  • Hedman 69090 Details

    GM Trucks

  • Without smog injection or injection heads.
  • Will fit with angle plug heads (Chevy aluminum only).
  • Must modify rotary A/C bracket.
  • Elite replacement gasket #27520.
  • Designed for use with a Trans-Dapt throttle body spacer.
  • Not legal for sale or use in California on pollution controlled motor vehicles.
  • Modification to stock exhaust required to retain catalytic converter.
  • This hedder has been submitted to the California Air Resources Board for criteria and exemption approval. Pending approval, the E.O. # should be available soon.

  • Specifications:

    Tube Size
    1.625
    Collector Tube Size (in.)
    3
    Application
    Automotive
    Engine Make/Size
    Chevy Small Block (262-400)
    Tube Direction
    Down Swept
    Port Shape
    Round
    Material
    Steel
    Engine Make/Size
    Chevy Small Block 350
    Coating/Finish
    Painted
    Collector Diameter (in.)
    3
    Gaskets Included
    Yes
    Bolts/Studs Included
    Yes
    Catalytic Converter(s) Included
    No
    Collector Attachment
    Ball and socket flange
    Cross Over Pipe Included
    No
    Header Finish
    Painted
    Header Material
    Steel
    Header Style
    Full-length
    Motor Mounts Included
    No
    Primary Tube Diameter (in.)
    1 5/8
    Primary Tube Gauge
    18-gauge
    Quantity
    Sold as a pair
    Reducers Included
    Yes
    Transmission Mount Included
    No
    Tuned
    No
    Weld-Up
    No
    Flange Style
    Standard
    Manufacturer's Part Number:
    69090

    With Hedman's guaranteed fit and lifetime warranty, how can you go wrong with these headers? Most are fabricated from 18-gauge steel with mandrel bent primary tubes and 1/4" flanges; some utilize thicker 14-gauge or 16-gauge tubing with 3/8" flanges. The black paint Hedman applies to uncoated headers is not high-temperature; it is pre-installation protection only. For the ultimate protection from the elements, click the following link to view Hedman's own HTC Hi-Tech Coated Headers. Made in the USA.

    JEGS Easy Kits are designed by JEGS Professionals to help you get all the performance parts you need.

    Does Hedman 69090 fit your vehicle?

    Narrow Results

    1975-1986 CHEVROLET K10 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1979 CHEVROLET K10 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: CHEYENNE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1982 GMC C1500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SIERRA GRANDE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1968 CHEVROLET K20 SUBURBAN

    • CC: 5358
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1969-1971 CHEVROLET K10 PICKUP

    • CC: 5736
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1980 CHEVROLET C10 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1981 CHEVROLET C10 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1981 CHEVROLET K10 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • EngineType: ALL
    • SubModel: DELUXE

    1967 GMC K1500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 4.6
    • SubModel: BASE
    • CUI: 283
    • EngineType: V8 ( 4.6 L / 283 )

    1967 CHEVROLET C10 SUBURBAN

    • CC: 4638
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 4.6
    • SubModel: BASE
    • CUI: 283
    • EngineType: V8 ( 4.6 L / 283 )

    1975-1978 GMC C25 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1990-1991 CHEVROLET C1500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: WT
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1969 GMC K15/K1500 SUBURBAN

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1981 CHEVROLET C10 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SCOTTSDALE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979-1983 GMC C2500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: HIGH SIERRA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1979 CHEVROLET C10 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SCOTTSDALE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975-1980 CHEVROLET K20 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 6.6
    • SubModel: CHEYENNE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1990 GMC V2500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SLE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1987 CHEVROLET R20 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1979 GMC C2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 6.6
    • SubModel: SIERRA CLASSIC
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1980 CHEVROLET C10 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 6.6
    • SubModel: BIG TEN
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1987 GMC R1500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1977 GMC K25 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SIERRA CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979-1980 GMC K2500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 6.6
    • SubModel: SIERRA GRANDE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1977-1978 CHEVROLET K20 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975-1977 GMC K15 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 6.6
    • SubModel: HIGH SIERRA
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1988-1991 GMC C2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SIERRA
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1990 GMC R1500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SLE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1976-1980 GMC K1500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 6.6
    • SubModel: HIGH SIERRA
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1979-1986 GMC C2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: HIGH SIERRA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1973-1974 CHEVROLET C10 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1978 GMC C25 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: HIGH SIERRA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1968 GMC K15/K1500 SUBURBAN

    • CC: 5358
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1980 CHEVROLET BLAZER K5

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: CHEYENNE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1981 CHEVROLET BLAZER K5

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: DELUXE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1982-1986 GMC C1500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1973 GMC C25/C2500 SUBURBAN

    • CC: 5736
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1970-1973 GMC C1500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1978 GMC C25 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 6.6
    • SubModel: SIERRA CLASSIC
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1987-1991 GMC R2500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980 CHEVROLET C10 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: CHEYENNE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1987 CHEVROLET V10 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1977-1978 GMC K15 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: HIGH SIERRA
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1976-1980 GMC K1500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975 CHEVROLET K5 BLAZER

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 6.6
    • SubModel: CUSTOM DELUXE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1979-1980 CHEVROLET K20 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1987 GMC JIMMY

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1984-1986 CHEVROLET K20 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SCOTTSDALE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1987 CHEVROLET V10 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: CUSTOM DELUXE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1967-1968 GMC C1500 PICKUP

    • CC: 5358
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1980 CHEVROLET C10 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1987-1988 CHEVROLET R20 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: CUSTOM DELUXE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1982 CHEVROLET C10 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SCOTTSDALE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1976 CHEVROLET K5 BLAZER

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1973-1974 CHEVROLET K20 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1987 CHEVROLET R10 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: CUSTOM DELUXE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1979 GMC K1500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1988-1991 CHEVROLET C2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979-1980 CHEVROLET BLAZER K5

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: CHEYENNE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1988-1991 GMC K2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SIERRA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1988-1990 CHEVROLET C2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: CHEYENNE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980 CHEVROLET K10 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SCOTTSDALE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1987-1989 GMC R1500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SIERRA CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1968 GMC K25/K2500 SUBURBAN

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1987 CHEVROLET R10 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SCOTTSDALE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1970-1991 GMC JIMMY

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1978 CHEVROLET K5 BLAZER

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 6.6
    • SubModel: CUSTOM DELUXE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975-1978 GMC C15 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SIERRA GRANDE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1987-1988 CHEVROLET R10 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1988-1991 GMC C1500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SIERRA SLE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1978 CHEVROLET K20 SUBURBAN

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SCOTTSDALE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1979-1982 GMC C2500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SIERRA GRANDE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1981 CHEVROLET C20 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: DELUXE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1981 CHEVROLET C10 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: CHEYENNE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975 CHEVROLET K5 BLAZER

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1987 CHEVROLET V10 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SCOTTSDALE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1969-1971 CHEVROLET K10 SUBURBAN

    • CC: 5736
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1978 GMC C25/C2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SIERRA GRANDE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1980 CHEVROLET C10 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: BIG TEN
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1987 GMC R1500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SIERRA CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1980 CHEVROLET K20 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 6.6
    • SubModel: SCOTTSDALE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975-1980 CHEVROLET C10 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: CHEYENNE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1978 GMC C25/C2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SIERRA GRANDE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1989-1991 CHEVROLET V1500 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1979 CHEVROLET C20 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SCOTTSDALE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1967 GMC K25/K2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 4.6
    • SubModel: BASE
    • CUI: 283
    • EngineType: V8 ( 4.6 L / 283 )

    1968 GMC C25/C2500 SUBURBAN

    • CC: 5358
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.3
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.3 L / 327 )

    1968 CHEVROLET C10 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.4
    • SubModel: BASE
    • CUI: 327
    • EngineType: V8 ( 5.4 L / 327 )

    1982 CHEVROLET K20 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SCOTTSDALE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1987 GMC R2500 PICKUP

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SIERRA CLASSIC
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1982-1986 CHEVROLET C10 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1981-1986 CHEVROLET BLAZER K5

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1987 CHEVROLET BLAZER

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1976-1978 GMC C15 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1988-1991 CHEVROLET C1500 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SCOTTSDALE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1969-1971 CHEVROLET C20 PICKUP

    • CC: 5736
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1984-1986 CHEVROLET K10 SUBURBAN

    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.7
    • SubModel: SCOTTSDALE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1982-1986 CHEVROLET C10 SUBURBAN

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1981-1986 CHEVROLET C20 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1981-1986 CHEVROLET K10 PICKUP

    • CC: 5031
    • Fitment_Note: Modification To Stock Exhaust Required To Retain Catalytic Converter~Will Fit With Angle Plug Heads/Chevy Aluminum Only~Must Modify Rotary A/C Bracket~Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port~Early Chassis Only~Elite Replacement Gasket PN[27520]~Without Smog Injection Or Injection Heads~Designed For Use With A Trans-Dapt Throttle Body Spacer~A/C Equipped Vehicles Require Large Piston Compressor Bracket PN[20110]
    • Liter: 5.0
    • SubModel: SCOTTSDALE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )
    69090 - Hedman Hedders Standard-Duty Uncoated Headers is rated 3.6667 out of 5 by 3.
    • 2016-12-05T08:42CST
    • bvseo_cps, prod_bvrr, vn_cps_3.4.0
    • cp_1, bvpage1
    • co_hasreviews, tv_1, tr_2
    • loc_en_US, sid_10001_10001_16742, PRD, sort_relevancy
    • clientName_jegs
    Rated 2 out of 5 by from Does not fit its application. I bought this for my 69 chevy C10 half ton, it seemed like the headers weren't even made for this truck. I would have had to cut 1-1/2" out of the top of my frame to make it fit. Instead I cut the tube and put a new pipe section in it. AND, the bolts they send won't go into the flanges without denting the pipes. All in all, I expected much more from Hedmann.
    Date published: 2014-11-01
    Rated 5 out of 5 by from Great Fit perfect on my 72'c10, was my third set of headers that I bought
    Date published: 2016-05-03
    • 2016-12-05T08:42CST
    • bvseo_cps, prod_bvrr, vn_cps_3.4.0
    • cp_1, bvpage1
    • co_hasreviews, tv_1, tr_2
    • loc_en_US, sid_10001_10001_16742, PRD, sort_relevancy
    • clientName_jegs
    Items You Need
    Items You May Also Consider