$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

Pistons

Pistons at JEGS include forged, hypereutectic and cast designs, sold as piston sets and complete piston and ring kits for street, strip and rebuild projects. Applications cover small block Chevy, big block Chevy, GM LS, Chrysler Hemi, Ford 7.3L Godzilla, Honda, Subaru, Nissan, Toyota and Mitsubishi engines. Compare bore size, compression height and dome, dish or flat-top designs, then call our tech specialists if you need help confirming fitment.

Show More

Forged vs. Hypereutectic vs. Cast Pistons: Which Do You Need?

Choose forged pistons for boost, nitrous or high rpm, hypereutectic pistons for strong street engines and cast pistons for stock rebuilds. The alloy and manufacturing process decide how much strength, expansion and clearance each piston needs.

  • Forged pistons are stronger and more ductile, so they handle boost, nitrous and high rpm, but they expand more and need extra piston-to-wall clearance.
  • Hypereutectic pistons use a high-silicon alloy, above roughly 12% silicon, so they expand less and can run tighter clearance.
  • Cast pistons suit stock rebuilds where you're matching factory specs and power levels.

Mahle Motorsports pistons are forged from a 4032 high-silicon, low-expansion aluminum alloy and carry multiple surface-treatment coatings. United Engine & Machine (UEM) pistons cover all three needs with ICON forged pistons, KB hypereutectic pistons and Silv-O-Lite OE-replacement pistons. For background on each family, read our guide to UEM's ICON, KB and Silv-O-Lite piston lines.

Piston Sets and Piston and Ring Kits: What's Included?

A piston set gives you one piston per cylinder for a single engine. A piston and ring kit adds a matched piston ring set sized to those pistons. A kit saves you from cross-referencing ring part numbers against bore size and ring groove dimensions.

Mahle Motorsports PowerPak piston & ring kits pair forged pistons and rings under one part number. Wiseco pistons include Pro Tru Street piston sets for small block Chevy and small block Ford, plus RED-Series piston sets for Chevy LS.

RaceTec pistons offer AutoTec forged piston sets in flat-top, dome and inverted-dome (dish) designs. They fit small block Chevy, small block Ford 302/351W and big block Chevy.

Buying pistons and rings separately makes sense when you want a specific ring material, face coating or gap style. If you're building that way, browse the full pistons and piston rings category to match ring sizes to your piston's ring grooves.

How to Choose Pistons for Your Engine Build

Start with bore size, then match compression height, top design and ring package to your compression target and power adder. Bore size must match your finished cylinder diameter, not just the factory spec.

Compression height is the distance from the pin bore centerline to the top of the piston. It has to work with your block's deck height, stroke and connecting rods length. Use our cubic inch to bore and stroke chart to confirm the combination behind your target displacement.

Flat-top pistons suit moderate compression, dome pistons raise compression for a naturally aspirated high-compression build and dish pistons lower it for boost or nitrous. Boosted and nitrous engines generally need forged pistons, a lower compression ratio and ring gaps set for the extra heat. If you're planning the whole bottom end, start with our article on choosing a short block for your horsepower goals.

Performance Pistons by Engine Platform

JEGS lists performance pistons for popular domestic V8s and import engines, so you can shop by the platform you're building. Each platform has its own bore sizes, pin diameters and valve-relief layouts, so always match pistons to your exact engine.

  • Small block Chevy pistons include forged flat-top, dome and dish sets for street-and-strip engines.
  • Big block Chevy pistons include 4.500 in. and 4.560 in. bore sets, including options for 555 cu in. builds.
  • LS pistons include forged sets for GM LS engines, such as Wiseco RED-Series pistons.
  • Chrysler pistons cover 5.7L and 6.1L Hemi engines plus the RB big block.
  • Ford 7.3L Godzilla pistons fit the 4.221 in. bore.
  • Import pistons cover Honda H22, Subaru, Nissan, Toyota and Mitsubishi engines.

Shop pistons by platform first, then confirm bore and compression height before you order.

Rings, Wrist Pins and Parts to Install With New Pistons

New pistons need correctly gapped rings, the right pins and fresh retainers, plus the tools to install them. Check whether your piston set includes pins and retainers before you order, because pin diameter and retainer style vary by design.

Replacement wrist pins let you upgrade pin wall thickness or match a specific rod. Fresh wrist pin retainers keep floating pins locked in place, so don't reuse old ones.

If you'd rather skip matching parts one at a time, engine rotating assemblies package pistons, rings and rods for a specific stroke and bore. Before assembly, gather engine rebuild tools like ring compressors and cylinder hones. You'll also want a ring filer and a dial bore gauge to set ring gaps and verify clearance.

Vehicle

ADD A VEHICLE TO GUARANTEE PARTS FIT

See products that fit

Frequently Asked Questions About Pistons

What does oversize piston (.020, .030) mean?

Oversize numbers show how much larger the piston is than the engine's standard bore, in thousandths of an inch. A .030 piston for a 4.000 in. bore engine is sized for a 4.030 in. finished bore. Your machinist bores and hones the cylinders to fit the exact pistons you buy.

Do I need to hone or bore the cylinders when installing new pistons?

You should at least hone the cylinders so new rings have a fresh crosshatch to seat against. If the cylinders are worn, tapered or out of round beyond spec, they need to be bored oversize and then honed. Measure each bore with a dial bore gauge before you order, so you know which piston size to buy.

Should pistons be replaced as a matched set?

Yes, replace pistons as a complete set whenever possible. Sets are made to consistent weights, so every cylinder carries the same reciprocating mass and the engine stays in balance. Mixing one new piston with used ones can change weight, compression and ring seal from cylinder to cylinder.

How do I know what piston size my engine needs?

Measure the finished bore diameter, or check your engine's factory bore and stroke specs if the block hasn't been machined. You can also use the vehicle selector on JEGS.com to narrow results to parts that fit your engine. If you're still unsure, call a JEGS tech specialist at 1-800-345-4545 for help confirming fitment.