$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

Roll Pans

Roll pans give your truck a smooth, flush look by swapping bulky factory chrome for a formed panel. You'll find front and rear options for C10, OBS, Silverado, Sierra, S10, Ram and El Camino builds, sorted by Year/Make/Model. Choose a smooth design or one with a license plate bucket, including 18-gauge steel and EDP-coated pans ready for paint.

Show More

What Is a Roll Pan Bumper?

A roll pan bumper is a smooth, formed panel that replaces your factory front or rear bumper for a clean, flush look. Instead of a chrome bar bolted to the frame, the roll pan fills the space below the tailgate or grille. It follows the body lines, so the truck looks tucked and finished.

Roll pans are a common upgrade on custom trucks because they clean up the rear profile. Most mount at or near the factory bumper locations. Many add a recessed license plate bucket so the plate stays centered.

A roll pan is part of the body, which is why you'll find it in our Sheet Metal and Body Panels category. Expect to paint it to match, just like any other panel.

Do You Need Front Roll Pans or Rear Roll Pans?

Most builders start with a rear roll pan because it replaces the most visible chrome on a pickup. A front roll pan replaces the front bumper with a smooth lower panel under the grille. Running both gives you a matched look front and rear.

Here's how our current lineup breaks down:

  • Rear roll pans cover the widest fitment, including 1947-1953 Chevy/GMC trucks and 2007-2012 GMC Sierra models
  • JEGS offers a front roll pan for select 1981-1991 GM Truck, Suburban, Blazer and Jimmy models
  • Key Parts makes a front roll pan for 1981-1987 Chevy/GMC trucks
  • A smooth front roll pan fits 1967-72 Chevy/GMC Pickup, Blazer and Suburban models and comes EDP coated

Front options cover fewer years, so confirm both ends are listed for your exact year range before you order.

Should You Choose a Roll Pan With a License Plate Box?

Choose a roll pan with a license plate box if your truck is street driven and the plate mounts at the rear center. A smooth pan without a pocket gives the cleanest look, but you'll need another plate location. Plate placement and lighting rules vary, so check your state and local regulations.

Our JEGS rear roll pans include a license plate bucket for 1988-1998 GM C/K Fleetside and Stepside trucks. They also cover 1999-2006 Silverado and Sierra and 1994-2003 S10 and Sonoma pickups.

OER offers both styles for classic Chevy/GMC Fleetside pickups. Its 1960-66 roll pan has a license plate pocket without license lamps, and its 1967-72 versions come with or without a license provision. If you're refreshing the whole rear end, browse tail light panels to finish the look.

What Should You Look for in a Steel Roll Pan?

Look at material, coating and mounting style first, since they decide how the pan installs and holds paint. Roll pans come in steel, fiberglass or urethane depending on the manufacturer. A steel roll pan can be welded to a steel bed for a seamless finish.

Goodmark builds an 18-gauge steel rear roll pan with a tag pocket for 1999-2006 Silverado 1500 and Sierra 1500 Fleetside beds. Several OER roll pans ship EDP coated. EDP is an electrocoat primer that protects bare metal from rust.

Most roll pans arrive unpainted, primed or EDP coated, so plan to scuff, prime as needed and paint to match. To compare panel makers, read our Goodmark body panel comparison guide. For more on choosing sheet metal, see our truck body panel buying guide.

Which Truck Roll Pan Fits Your C10, OBS or Late-Model Truck?

The right truck roll pan matches your exact year, cab and bed style, because Fleetside and Stepside beds use different pans. Add your vehicle in the Year/Make/Model selector to narrow the grid to parts listed for your truck. Current fitment includes:

  • 1947-1953 Chevy/GMC trucks, including an OER rear roll pan
  • 1960-1966 and 1967-1972 Chevy/GMC pickups, with and without license provisions
  • 1973-1987 Chevy/GMC C10 rear roll pans from Key Parts
  • 1988-1998 GM C/K OBS Fleetside, Stepside, Suburban and Tahoe trucks
  • 1999-2006 Silverado and Sierra, 2007-2012 GMC Sierra and 2004-2012 Chevy Colorado
  • 2002-2008 Dodge Ram and 1994-2003 Chevy S10 and GMC Sonoma

RestoParts adds a roll pan for the 1978-1987 Chevy El Camino. If the bed itself needs work first, check our truck bed parts before you fit the pan.

How Do You Install a Bolt-On or Weld-In Roll Pan?

Most roll pans bolt on using the factory bumper mounting points, while some steel pans weld in for a seamless finish. Bolt-on mounting works with any material. Welding only suits a steel pan on a steel bed.

Start by removing the bumper and its frame brackets, and pull the tailgate for access. Mock up the roll pan and check the bedside gaps, and test-fit before paint so you can adjust brackets without damaging the finish. Then bolt or weld it in place.

If you find rust behind the old bumper, repair it with patch panels before final fitment. Our body panel replacement guide on cost, installation and prep walks you through the bodywork. When you're ready, add your vehicle and shop the roll pans listed for your year range.

Vehicle

ADD A VEHICLE TO GUARANTEE PARTS FIT

See products that fit

Frequently Asked Questions About Roll Pans

Are roll pans legal?

Roll pan legality depends on state and local laws, including bumper and license plate rules. Check your state and local regulations before you remove a factory bumper on a street-driven vehicle.

Can you still tow with a roll pan installed?

In many cases, yes. Builders often mount a hidden hitch behind the roll pan so they can tow without a visible bumper. Confirm the hitch fits your frame and clears the pan before you buy.

Will a roll pan reduce rear impact protection?

Yes. A roll pan is a body panel, so you give up some low-speed impact protection and the bumper step. Factor that in if you often back up to trailers or loading docks.

Does a roll pan affect tailgate operation?

It can if the fit is off. Check tailgate clearance during mock-up, before you drill or weld, so the gate opens and closes without rubbing. With the tailgate off, it's also a good time to add truck bed and tailgate accessories.

Which brands make the roll pans sold at JEGS?

You'll find roll pans from JEGS, Key Parts, OER, RestoParts and Goodmark. Each brand covers different years and models, so filter by your vehicle to compare options.