JEGS
High-Energy Ignition Coil for Breaker Points/Non-CD Electronic Ignition Systems [Black]
555-40117
Product Q&A
View Now
![High-Energy Ignition Coil for Breaker Points/Non-CD Electronic Ignition Systems [Black]](http://www.jegs.com/images/photos/500/555/555-40117.jpg "High-Energy Ignition Coil for Breaker Points/Non-CD Electronic Ignition Systems [Black]")
Items You Need
| Ratings |
|---|
| Price |
| Brand |
Breaker Points/Non-CD Ignition Coils
JEGS 555-40117 High-Energy Ignition Coil Features:
- JEGS 40117 Black High-Energy Ignition Coil is a performance upgrade designed for use with breaker point (1.4-ohm resistance) or standard non-CD (Capacity Discharge) electronic ignition systems.
- Capable of producing up to 45,000 volts of power
- Dimensions: 2.125 in.Diameter
- Overall Height: 6.125 in.
- Case Height: 4.625 in.
- Tower Height: 1.50 in. From Top of Case
- Stud: .375 in. High x 5 mm x 0.8 mm Thread
- Nut: 5 mm x 0.8 mm, Requires 8 mm Socket for Removal
JEGS 555-40117 High-Energy Ignition Coil Specifications:
- Input: 12-Volt
- Output: 45,000 Volts
- Primary Resistance: 1.4 ohms
- Secondary Resistance: 9.8 k ohms
- Turns Ratio: 90:1
JEGS 555-40117 High-Energy Ignition Coil Includes:
- (1) Black Coil
- (2) 5mm x 0.8mm thread Nuts
- (2) 5mm flat washers
- (2) 5mm lock washers
JEGS 555-40117 High-Energy Ignition Coil Dimensions:
- Diameter: 2.125 in.
- Overall Height: 6.125 in.
- Case Height: 4.625 in.
- Tower Height: 1.50 in. From Top of Case
- Stud: .375 in. H x 5 mm x 0.8 mm Thread
- Nut: 5 mm x 0.8 mm, Requires 8 mm Socket for Removal
JEGS 555-40117 High-Energy Ignition Coil Note:
Will not work with aftermarket CD (Capacity Discharge) electronic ignition systems similar to MSD that require an external control box.
Specifications:
Does this coil require an external resistor when used on a points system or does it have an internal resistor ? If so what ohm resistor should be used. Thanks
Will this work with a Pertronix Ignitor 2 without a ballast resistor
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.