Order Status & Returns
Gift Cards
Help Center
1-800-345-4545
![Firewall Grommet Seal, Extended Boot Style [.416 in. I.D. Hole]](https://www.jegs.com/images/mini_750/500/555/555-60792.jpg)
Vehicle Info NeededFirewall Grommet Seal, Extended Boot Style [.416 in. I.D. Hole]
Ships Today
Lowest Price GuaranteeItems You Need
![Colored Electrical Tape [5 pack]](https://www.jegs.com/images/mini_200/500/555/555-w549.jpg)
![Crimp Battery Cable End Lug for 3/8 in. or 10 mm Stud [90 degree]](https://www.jegs.com/images/mini_200/500/555/555-10326.jpg)
![Remote Battery Cable Kit [1-Gauge, 3/8 in. Battery Terminal Size]](https://www.jegs.com/images/mini_200/500/555/555-10290.jpg)
JEGS
Part Number : 555-W5220
![19.2-Volt Cordless Drill with 13-Piece Bit Set [3/8 in. Chuck]](https://www.jegs.com/images/mini_200/500/555/555-w50092.jpg)
JEGS
Part Number : 555-W50092
![61-Piece Heat Shrink Tubing Kit [Black]](https://www.jegs.com/images/mini_200/500/555/555-10630.jpg)
![Crimp Connector Kit [160 Pieces]](https://www.jegs.com/images/mini_200/500/555/555-10705.jpg)
- Firewall Grommet Seal
- Extended Boot Style
- 2 in. Diameter Aluminum Flange w/Four Mounting Holes
- Rubber Center Grommet Seal with .416 in. I.D. Hole
- Designed for a Custom Fit
- Sold Individually
JEGS 555-60792 1-Piece Flat Style Firewall Grommet Seal
JEGS Extended Boot Style Firewall Grommet Seal was created to protect your vehicle's interior against the chance of equipment breakdown anywhere a hose, cable, or wire passes through a panel. The rubber seal provides fire-resistant protection against chafing and abrasion on hard, rigid surfaces. It is easy to install and comes with a 2-in. diameter aluminum mounting flange with four mounting holes and a rubber grommet with a .416 in. I.D. access hole. Its tight fit will prevent dirt, heat, fumes, and moisture from entering your interior.
Protect Your Rides Interior
JEGS Firewall Grommet Seals help to keep unwanted smoke, fumes and debris from entering the interior while protecting hoses, wiring and linkage from chafing or damage when passing through a panel. Available in several pre-made sizes and some without a hole for custom fitment (just use a punch to add the desired hole size). Provides a neat and finished look. For use with AN lines, wiring, steering shaft, throttle linkage and more.
