Power Package includes matching:
Performer Intake Manifold p/n 350-3701,
Edelbrock Performer 600cfm Carburetor p/n 350-1400,
EGR Carburetor Adapter p/n 350-1476.
Performer-Plus Hydraulic Flat Tappet Camshaft & Lifters p/n 350-2103. Designed for street 1955-86 262-400ci Chevrolet small-block V8s. This intake is a stock replacement/street legal part for 305, 350 and 400 V8s with OEM 4-bbl. or Edelbrock p/n 350-1400 carb. 1972-86 and GM corporate engines with 350 V8s; 1981-86. (Intake p/n 350-2101 is stock replacement/street legal part for 302, 327 and 350ci V8s with OEM or Edelbrock (350-1400) 4-bbl. carb.; 1966-72 (1973 non-California) passenger cars, 1966-83 trucks and Suburbans; except stock equipped EGR.) Performers accept late-model choke, waterneck, air-conditioning, alternator and H.E.I. Has provisions to add oil fill tube. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads.
Installation Notes:
Port exit dimensions: 1.14'' x 1.88'' Manifold height: (A) 3.50'' , (B) 4.60''
Click here to determine carburetor pad height. Recommended intake gasket is Fel-Prop/n 375-1256. Use EGR adapter p/n 350-8035 to adapt clamp-on EGR valve. Choke plate p/n 350-8901 is included. EGR spacerp/n 350-1476 is required with p/n 350-1400 carburetor, also required on centerbolt heads with 1986 & earlier bolit pattern. Carburetor Recommendations:
OEM 4-bbl.
carb will work with non-EGR system carb has provision for evaporative canister carb acceptable to factory cruise control use Automatic Divorced Choke Rod p/n 350-9171 and throttle bracket p/n 350-8036 for 1972-78 vehicles. Edelbrock Performer 600cfm Carburetor p/n 350-1400.
carb will work with EGR system carb has provision for evaporative canister, carb acceptable to factory cruise control. use throttle bracket p/n 350-8036 for 1972-78 vehicles. Edelbrock Performer 600cfm Carburetor p/n 350-1405.
carb will work with non-EGR system carb has no provision for evaporative canister, requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit carb acceptable to factory cruise control. carb has manual choke only. use throttle bracket p/n 350-8036 for 1972-78 vehicles. Edelbrock Performer 600cfm Carburetor p/n 350-1406.
carb will work with non-EGR system carb has no provision for evaporative canister, carb acceptable to factory cruise control. use throttle bracket p/n 350-8036 for 1972-78 vehicles. Edelbrock Thunder Series AVS 650cfm Carburetor <p/n 350-1805.
carb will work with non-EGR system carb has no provision for evaporative canister, requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit carb acceptable to factory cruise control. carb has manual choke only. use throttle bracket p/n 350-8036 for 1972-78 vehicles. Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1806
carb will work with non-EGR system carb has no provision for evaporative canister, carb acceptable to factory cruise control. use throttle bracket p/n 350-8036 for 1972-78 vehicles. Camshaft Specs:
*Note: 50-state legal for 1968-80 400ci SB-Chevy.
Designed for optimum torque from the low-end to the mid-range. They are smooth idling cams for dailey drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque.
| Duration Advertised: | 288° Intake / 288° Exhaust |
| Duration @ .050'' Lift: | 214° Intake / 214° Exhaust |
| Valve Lift: | .442'' Intake / .442'' Exhaust |
| Lobe Separation Angle: | 112° |
| Open/Close @.050'' Cam Lift: | Intake - 0° ATDC (opens) / 34° ABDC (closes)
Exhaust - 44° BBDC (opens) / 10° BTDC (closes) |
VIEW CART
){kind=link}
