Milodon 31060 - Milodon Street/Strip Oil Pans
Milodon#697-31060Small Block Chevy Oil Pan |
||||
|
|
||||
Milodon 31060 - Milodon Street/Strip Oil Pans Details
Chevy
Fits 1955-79 Small Block Chevy with left hand dipstick into 1962-67 Chevy II.
This rear sump pan is a requirement for any racing or high performance use, replacing the poorly designed stock front sump configuration. Will not work with stock power steering.
Use oil pump pickup 697-18310 with stock and Melling 689-M55 oil pump or Milodon oil pump pickup 697-18313 with 697-18750 oil pump,
Oil pump shaft 697-23050,
Oil pan gasket 697-40100,
Rear pan baffle 697-32500,
Windage tray 697-32100 (solid louvered tray) or 697-32250 (diamond mesh tray),
Windage tray install kit 697-81150,
Dipstick 697-22000.
Designed for performance street and drag strip applications, these well engineered oil pans actually free up additional horsepower. Deep sumps provide ample oil supply and the low profile give adequate oil supply and maximum available ground clearance. Clears stock chassis, steering and most headers as listed. This is a necessity where high volume oil pumps and increased RPM ranges are used. Made in the U.S.A. Street/Strip - Low Profile
The Low Profile "triangulated" sump design that was originally developed by Milodon over two decades ago gives both adequate ground clearance, as well as sufficient oil capacity for any kind of high performance use. This pan is equally suited for use on the street or strip. Oil control baffles 100% subdue oil movement and provide increased horsepower. Street/Strip - Stroker Low Profile
Uses high horsepower output design. The front of the oil pan is deeper to allow the use of a full length, competition style tray included. Tray is attached in the pan by quick release fasteners to allow easy removal. The pan will fit stock crossmember cars without modification, as well as, stock starters and oil filters.
Street/Strip - Street Performance
Specifically designed for applications that desire improvements over stock oil pans yet do not want a high cost racing oil pan. While appearing stock on the outside, it contains sufficient horizontal baffling to 100% control 5 qts. of oil. Internal mounted windage tray provides increased power yet requires no block mounting to install. A complete low cost performance package. 
JEGS EZ Complete Kits are designed by JEGS professionals so you get all the parts you need.
