Fuse Panels
Fuse blocks give each accessory circuit in your car or truck its own protected feed, organized in one panel. At JEGS, you can shop auxiliary fuse blocks, universal fuse panels, OE-style replacement fuse boxes and dash fuse panel covers in one place. Compare circuit counts, ATO/ATC blade-fuse layouts, LED blown-fuse indicators, grounding blocks and weather-resistant designs to match your build.
Show More
What Fuse Block Types Can You Choose From?
Fuse blocks come in five common types, each suited to a different job. The right type depends on whether you're adding new circuits or restoring a factory system. Every type protects its circuits with replaceable fuses, and you can stock spares from our automotive fuses and circuit breakers.
- Standard fuse blocks with LED indicators, including JEGS brand products in 4-pole and 10-pole layouts
- Fuse blocks with a built-in grounding block, such as a 10-pole unit with a 12-position grounding block
- Auxiliary bus assemblies that split one power feed across several fused outputs
- Expansion modules that add fused circuits to an existing aftermarket system
- OE-style replacement fuse boxes, power distribution center covers and dash fuse panel covers
Splitting heavy cable to a few high-current loads? Compare fuse distribution blocks. When you only need a common tie point for power or ground wires, electrical junction blocks are a simpler fit.
How Many Circuits Does Your Fuse Block Need?
Count every circuit you plan to add, then leave a few spare positions for future upgrades. A fuse block that's full on day one forces you to share circuits later, and that makes troubleshooting harder.
Start by listing each load you're adding. Give every high-draw accessory its own fused position instead of doubling up. For a handful of add-ons, a 4-pole or 6-position block usually covers you.
Larger projects call for a 10-position block or a Painless Performance Products Universal Fuse Block with 14 circuits. If you're rewiring the whole car, complete wiring harnesses may make more sense than stacking auxiliary blocks. To see how a full system divides its loads, check our 21-circuit wiring harness diagram guide before you settle on a count.
Choosing a Fuse Block by Fuse Style and Features
Match the fuse block to the fuse style you carry, then pick options for where it mounts. Most aftermarket blocks take ATO/ATC blade fuses, which are easy to find and swap on the road. Check the fuse style before you buy, since mini blade fuses won't fit an ATO/ATC slot.
LED indicators light up a blown fuse, so you can find a dead circuit without pulling every fuse. A built-in grounding block gives your accessories a shared ground right next to their power feeds. Weather-resistant designs, like the Painless CirKit Boss kit, resist moisture and dust in engine bays and off-road rigs.
If you want a heavy-duty build, Ron Francis Wiring offers WayCool fuse blocks in 6-position and 10-position sizes, plus an Express Series fuse panel. For high-current circuits like an electric fan or fuel pump, run the load through automotive relays. The fuse block then protects each relay circuit, and your switch only carries a small trigger current.
Auxiliary vs OE Replacement Fuse Panels
Choose an auxiliary fuse panel to add new circuits, and an OE replacement to restore a damaged or corroded factory fuse box. Auxiliary panels mount alongside your existing wiring and power new accessories without cutting into factory circuits.
American Autowire offers a Six-Fuse Auxiliary Fuse Block Bus Assembly with an 80-amp bus. Its Track20 Accessory Fuse Panel Expansion Module adds 10 circuits with 8 fused outputs and fits universally. You'll also find a Dash Fuse Panel Kit for ATO fuses and a Fuse Block Repair Kit.
OE-style replacements bolt into the factory location and keep the original layout. Options include fuse box assemblies and fuse block modules for vehicles such as the 2004 Ford Expedition and 2014-2016 Chevrolet models. Restorers can also pick up power distribution center covers and dash fuse panel covers for 1993-1996 Camaro and 1998-2002 Camaro/Firebird LS1 cars.
Adding several new accessories? Pair an auxiliary panel with one of our switch panels to control each circuit from the cabin.
Installing and Wiring a Fuse Block
A safe install comes down to three things: a fused main feed, correctly rated circuit fuses and solid grounds. Fuse the main power feed near the battery so the cable to the block is protected along its full length.
Older cars often use fusible links to protect main feeds. Our fusible link replacement guide explains how they work and when to swap one out.
Size each fuse to match the wire it protects, since the fuse exists to keep that wire from overheating. Run ground wires to clean, bare-metal points, or to the block's grounding bus if it has one. Label every circuit as you go so you can trace it later.
For routing, terminal and connection tips, read our wiring harness installation guide. When you're ready to finish the project, shop all wiring, relays and switches for the supporting parts.
ADD A VEHICLE TO GUARANTEE PARTS FIT
See products that fit
ADD A VEHICLE TO GUARANTEE PARTS FIT
See products that fit

PAINLESS PERFORMANCE PRODUCTS
CirKit Boss Weather Resistant Auxiliary Fuse Block Kit Extreme Use Where Moisture/Dust Resistance is Important
Part Number: 764-70217

PAINLESS PERFORMANCE PRODUCTS
CirKit Boss Weather Resistant Auxiliary Fuse Block Kit Extreme Use Where Moisture/Dust Resistance is Important
Part Number: 764-70217

PAINLESS PERFORMANCE PRODUCTS
CirKit Boss Auxiliary Fuse Block Kit Perfect For Use Under Normal Conditions
Part Number: 764-70118

PAINLESS PERFORMANCE PRODUCTS
CirKit Boss Auxiliary Fuse Block Kit Perfect For Use Under Normal Conditions
Part Number: 764-70118
![Standard Fuse Block with LED Indicators [10-Pole with 12-Position Grounding Block]](https://www.jegs.com/images/mini_100/500/555/555-10446.jpg)
JEGS
Standard Fuse Block with LED Indicators [10-Pole with 12-Position Grounding Block]
Part Number: 555-10446
![Standard Fuse Block with LED Indicators [10-Pole with 12-Position Grounding Block]](https://www.jegs.com/images/mini_200/500/555/555-10446.jpg)
JEGS
Standard Fuse Block with LED Indicators [10-Pole with 12-Position Grounding Block]
Part Number: 555-10446

PAINLESS PERFORMANCE PRODUCTS
CirKit Boss Auxiliary Fuse Block Kit Perfect For Use Under Normal Conditions
Part Number: 764-70114

PAINLESS PERFORMANCE PRODUCTS
CirKit Boss Auxiliary Fuse Block Kit Perfect For Use Under Normal Conditions
Part Number: 764-70114

HOOKER HEADERS
Blackheart Gen III Hemi Engine Swap Power Distribution Box Mounting Bracket for 1997-2004 Dodge Dakota
Part Number: 520-BHS577

HOOKER HEADERS
Blackheart Gen III Hemi Engine Swap Power Distribution Box Mounting Bracket for 1997-2004 Dodge Dakota
Part Number: 520-BHS577

PAINLESS PERFORMANCE PRODUCTS
CirKit Boss Weather Resistant Auxiliary Fuse Block Kit Extreme Use Where Moisture/Dust Resistance is Important
Part Number: 764-70213

PAINLESS PERFORMANCE PRODUCTS
CirKit Boss Weather Resistant Auxiliary Fuse Block Kit Extreme Use Where Moisture/Dust Resistance is Important
Part Number: 764-70213

PAINLESS PERFORMANCE PRODUCTS
CirKit Boss Auxiliary Fuse Block Kit Perfect For Use Under Normal Conditions
Part Number: 764-70103

PAINLESS PERFORMANCE PRODUCTS
CirKit Boss Auxiliary Fuse Block Kit Perfect For Use Under Normal Conditions
Part Number: 764-70103

SHAFERS CLASSIC REPRODUCTIONS
D1400 1963-1965 Chevrolet Chevelle Charging System Shunt
Part Number: 910-D1400

SHAFERS CLASSIC REPRODUCTIONS
D1400 1963-1965 Chevrolet Chevelle Charging System Shunt
Part Number: 910-D1400

HAWKS MOTORSPORTS
HT10209456 Fuse Panel Cover, 1990-1992 Chevy Camaro/Pontiac Firebird
Part Number: 199-HT10209456

HAWKS MOTORSPORTS
HT10209456 Fuse Panel Cover, 1990-1992 Chevy Camaro/Pontiac Firebird
Part Number: 199-HT10209456
Frequently Asked Questions About Fuse Blocks
What Is the Difference Between a Fuse Block, Fuse Box and Fuse Panel?
The terms overlap, and most people use them interchangeably. A fuse box usually means the factory unit with a cover, while a fuse block often describes an aftermarket unit you add for new circuits. The term fuse panel applies to both, which is why we group them together on this page.
Can You Use Fuse Taps Instead of a Fuse Block?
Fuse taps work for one or two low-draw accessories, but they add load to circuits the factory sized for other jobs. A dedicated fuse block gives each new circuit its own feed and fuse. That keeps factory circuits stock and makes troubleshooting easier.
What Gauge Wire Should Feed a Fuse Block?
Size the feed wire for the total current of every circuit the block runs at once, then fuse it near the battery to match. Longer runs need heavier wire to limit voltage drop. Check the block's maximum input rating and your wire maker's ampacity chart before you cut cable.
Where Should You Mount a Fuse Block?
Mount it in a dry, accessible spot where you can reach the fuses without tools. Under the dash or inside the trunk are common choices. If the block has to live in the engine bay, use a weather-resistant design with a cover and keep it away from exhaust heat.
Why Does a Fuse Keep Blowing After You Install a Fuse Block?
A repeat blow usually points to a short to ground, a pinched wire or a fuse rated below the circuit's normal draw. Check the wire route for chafed insulation first. Never fix it with a larger fuse than the wire can handle.


![Standard Fuse Block with LED Indicators [10-Pole]](https://www.jegs.com/images/mini_100/500/555/555-10428.jpg)
![Standard Fuse Block with LED Indicators [10-Pole]](https://www.jegs.com/images/mini_200/500/555/555-10428.jpg)






![Standard Fuse Block with LED Indicators [4-Pole]](https://www.jegs.com/images/mini_100/500/555/555-10425.jpg)
![Standard Fuse Block with LED Indicators [4-Pole]](https://www.jegs.com/images/mini_200/500/555/555-10425.jpg)

















