Account Login
Gift Cards
Track Order
Help Center

Edelbrock Performer Intake Manifold for 1955-1986 Small Block Chevy


made in usa

Product Q&A
View Now
Click image to zoom
Performer Intake Manifold for 1955-1986 Small Block Chevy
6 left in stock
Performer Intake Manifold
  • 1955-1986 Small Block Chevy 262-400ci
  • 4-bbl Spread Bore Carb Flange (non-EGR)
  • Idle-5500 RPM Range
  • Satin Finish
  • Free Shipping - Ships

    Items You May Also Consider

    2101 is rated 4.7 out of 5 by 11.
    Rated 5 out of 5 by from Edelbrock - 2101 After reading a lot of reviews I this was my choice. I also chose the universal throttle bracket. While I don't have everything collected to finish my build I am very happy with the choices I made. A+
    Date published: 2021-04-05
    Rated 5 out of 5 by from Great product. Always had a great experience ordering from Jegs, but their shipping rates should be looked at and lowered a little.
    Date published: 2020-10-16
    Rated 5 out of 5 by from So far so good Jegs did a Great job ! the box was missing the choke cover and I called (on a Sunday !!) ( they even had a tech guy working !) and they shipped it right out They just became my go to parts store ! And the manifold is fine , just watch out on your hood clearance with your air cleaner
    Date published: 2017-02-07
    Rated 5 out of 5 by from Lookin' good Fits great, bolted right on. Looks great and it's "MADE IN THE USA".
    Date published: 2016-05-07
    Rated 5 out of 5 by from Great part Purchased this, it showed up the next day. Great service!
    Date published: 2015-10-29
    Rated 5 out of 5 by from awesome Fits my block very nicely and has all the correct assesory holes
    Date published: 2015-06-11
    Rated 5 out of 5 by from My 2nd This is my 2nd performer. I have one on another engine and it is just a fine manifold. Fit is fine, easy to install and is good to look at. This is an upgrade to a former two barrel engine using the Quadrajet and it runs just fine.
    Date published: 2014-11-04
    Rated 4 out of 5 by from Quality product My only complaint was clearance of the bolts against the cast. It was only one. On the left side next to where the riser is it was too tight to get the proper torque. After a bit of dremel work I got it to work.
    Date published: 2020-05-26
    • y_2024, m_2, d_21, h_11
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
    • cp_1, bvpage1
    • co_hasreviews, tv_2, tr_9
    • loc_en_US, sid_10001_10001_18646, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Will it work on a 1995 trans am 5.7 with stock aluminum heads?

    Asked by: Vettster
    The Edelbrock 350-2101 intake will bolt to '95, 5.7 aluminum heads.
    Answered by: jshook
    Date published: 2023-05-16

    Which aluminum heads can I use with this intake and a mild thumper cam?

    Asked by: Craig43
    The 350-2101 Edelbrock intake is compatible with pre-'86 cylinder heads.
    Answered by: jshook
    Date published: 2022-08-08

    Hi Would this intake clear the Corvette C4 hood? Carb will be a Holley 650 DP. I intend to use a dropbase air cleaner with a low airfilter combined with a airfilter lid like those offered by K&N for example. Best regards, Tobias Pervik.

    Asked by: Tobias
    Clearance may be close. We recommend test fitting before bolting everything down.
    Answered by: Jon Jegs Tech
    Date published: 2020-02-15

    I have a 65 Chevy C10 with a 283 V8. Will this work? What carb should I use with it? Just picked up a 700r4 trans, are there any other parts I need to make it all work?

    Asked by: jk3rd7306
    Yes, this will work for your engine. As far as the transmission goes you may need the TV cable if you don't have one - Part Number: 555-157013 and a 500 cfm carburetor will work well - Part Number: 350-1403
    Answered by: Rusty B
    Date published: 2018-01-04


    Asked by: SAND RAT
    This will fit, but you may have hood clearance issues if using the stock air cleaner.
    Answered by: Rusty B
    Date published: 2024-01-13

    will this manifold with carb fit under the hood of a 1974 corvette

    Asked by: philip14
    Yes with a low profile air cleaner
    Answered by: Jegs Tech
    Date published: 2024-01-13
    • y_2024, m_2, d_20, h_8CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_6
    • loc_en_US, sid_10001_10001_18646, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Items You Need

    Easy Kits

    Related Products

    Designed for street 1985-95 Chevy 3.8L and 4.3L V6 200/229/262ci. Does not accept stock automotive carbs or 262 TBI unit. Dual bolt pattern water neck fits both automotive and marine applications (produced 18 HP more than older manifold design on ...
    Designed for street big block Chevy 396-502 using general duty oval port cylinder heads. For 396, 402, 427, and 454 with OE 4-bbl carb on 1965-73 non-CA passenger cars and 1966-83 trucks, Suburbans, and heavy vehicles except stock-equipped EGR(NOTE: #350-3761 ...
    The Performer Air-Gap features the air-gap design for the ultimate street performance in the idle to 5500 rpm range. This design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser ...

    Recently Viewed

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.


    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.