CD Electronic Ignition Coils
JEGS 40119 Black High-Energy Ignition Coil is a performance upgrade designed for use with CD (Capacity Discharge) electronic ignition systems that is capable of producing up to 45,000 volts of power.
Note: Will not work with breaker points or standard non-CD (Capacity Discharge) electronic ignition systems.
- (1) Black Coil
- (2) 5mm x 0.8mm thread Nuts
- (2) 5mm flat washers
- (2) 5mm lock washers
- Diameter: 2.160 in.
- Overall Height: 5.625 in.
- Case Height: 4.375 in.
- Tower Height: 1.250 in. from top of case
- Stud: .375 in. H x 5mm x 0.8mm thread
- Nut: 5mm x 0.8mm, requires 8 mm socket for removal
Hotter Spark for More Performance
JEGS High-Energy Ignition Coils are a perfect choice for improving your ignition systems performance and they are manufactured with special windings to improve spark output. Each coil is oil filled for durability and cooling that outperforms OEM (Original Equipment Manufacturer) factory units by over 30 percent (capable of up to 45,000 volts), plus the black alkyd tower helps prevent flashover and misfire.
We offer two types of high-voltage, 12-volt coils as follows:
- Breaker point ignition/standard electronic non-CD (Capacitor Discharge) ignition: Primarily used as a performance upgrade over a factory coil and can also be used with our SSR-III ready-to-run distributors.
- CD electronic ignition: Used as a performance upgrade in conjunction with an aftermarket distributor like our SSR-II units that require an external control box.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.